Slasher Stripes
Originally Posted by cgocifer
Personally, I don't like the silver over the charcoal. I think the silver or aluminum would be nice by itself. I also noticed that you have a small ding right above your driver's side stripes. You should take that to Dent Wizard or another paintless dent repair shop. It would probably cost you about 60 bucks.
Definitely go with the Aluminum if you're going to do this. It's a pretty good match for the wheels, windshield surround, front fender strakes and rool hoops and I love the way that silver color contrasts against my Aero Blue paint.
Originally Posted by VALKRYDERGUY
OK
I guess I have been getting a little carried away with these stripes but the material is inexpensive so I thought I would try the Aluminum look to better match the wheels.
As it turns out is also matches the SSB closely to.
So I installed the 2.5" Aluminum stripes over the original 3" black stripes and got the look I like the best out of all my trials
This is the link to the manufacturer website.
Click where to buy to find a retailer near you.
This is the product the member Mike-in-Orange used on his aero blue Crossfire.
They have 35 designs and colors and it comes in 5" wide 36" long sheets and can easily be cut.
Here it is:

I guess I have been getting a little carried away with these stripes but the material is inexpensive so I thought I would try the Aluminum look to better match the wheels.
As it turns out is also matches the SSB closely to.
So I installed the 2.5" Aluminum stripes over the original 3" black stripes and got the look I like the best out of all my trials
This is the link to the manufacturer website.
Click where to buy to find a retailer near you.
This is the product the member Mike-in-Orange used on his aero blue Crossfire.
They have 35 designs and colors and it comes in 5" wide 36" long sheets and can easily be cut.
Here it is:
Originally Posted by InfernoRedXfire
This one gets my vote. But I think you need to increase the angle a bit. It's too vertical. IMHO Look at the angle you did the other ones.
The black stripes under the aluminum have never been removed from the original pics.
They are cut and aligned with the door angle.
Originally Posted by VALKRYDERGUY
No changes were ever made.
The black stripes under the aluminum have never been removed from the original pics.
They are cut and aligned with the door angle.
The black stripes under the aluminum have never been removed from the original pics.
They are cut and aligned with the door angle.
Originally Posted by Moparrbust
What is the actual significance and/or meaning of these "slasher stripes"?
I know the single diaganol stripe on a persons driver side fender indicates that he is a rookie driver..........for road course events. I'm just wondering if these types of stripes have some meaning as well.
I know the single diaganol stripe on a persons driver side fender indicates that he is a rookie driver..........for road course events. I'm just wondering if these types of stripes have some meaning as well.
Originally Posted by Mike-in-Orange
After stumbling across a couple of threads discussing "slasher stripes" I decided to do the same to my car. Quick and easy installation too. I like it.
I've got a vinyl sign computer guy making me silver slasher stripes. I'm having them 3 and a quarter wide on a 45 degree angle. They will have a quarter inch spacing between the two stripes. Now the best part>> It will be the AMG logo. The upper part of the front stripe will have the strope blocking 45 degree cutouts. The rear upper part of the rear stripe with have AMG cutout. The passenger side will be flipped. NOT REVERSED. So the strope blocking cutouts will be on the first stripe also. In Short> On both sides the big block will be towards the front with the five blocks sizing down in size to the rear. With AMG being the back stripe on both sides. Now are you confused? I'll be picking them up at the end of the month. Don ///// AMG <Drivers side Passenger side> AMG \\\\\
[quote=Squirrel Crusher]I've got a vinyl sign computer guy making me silver slasher stripes. I'm having them 3 and a quarter wide on a 45 degree angle. They will have a quarter inch spacing between the two stripes. Now the best part>> It will be the AMG logo. The upper part of the front stripe will have the strope blocking 45 degree cutouts. The rear upper part of the rear stripe with have AMG cutout. The passenger side will be flipped. NOT REVERSED. So the strope blocking cutouts will be on the first stripe also. In Short> On both sides the big block will be towards the front with the five blocks sizing down in size to the rear. With AMG being the back stripe on both sides. Now are you confused? I'll be picking them up at the end of the month. Don ///// AMG <Drivers side Passenger side> AMG \\\\\[/quote]
I want!!!!
I want!!!!
I think my favorite "slasher stripe" application is on TBirds roadster.
Right above the stripe he has some lettering, I can't remember what it said, but it looked cool. (Like it came from the factory).
Just above the letters is a Karmann emblem.
https://www.crossfireforum.org/galle...hp?photo=24545
Right above the stripe he has some lettering, I can't remember what it said, but it looked cool. (Like it came from the factory).
Just above the letters is a Karmann emblem.
https://www.crossfireforum.org/galle...hp?photo=24545
Originally Posted by +fireamx
I think my favorite "slasher stripe" application is on TBirds roadster.
Right above the stripe he has some lettering, I can't remember what it said, but it looked cool. (Like it came from the factory).
Just above the letters is a Karmann emblem.
https://www.crossfireforum.org/galle...hp?photo=24545
Right above the stripe he has some lettering, I can't remember what it said, but it looked cool. (Like it came from the factory).
Just above the letters is a Karmann emblem.
https://www.crossfireforum.org/galle...hp?photo=24545
Thanks, +fireamx, you beat me to the post of the pics.
Here's a pic from the side.
Last edited by TBird; Oct 24, 2008 at 08:34 PM.
TBird, now I remember why it looked like it came from the factory. You used the Crossfire "font".
Tony, Yours looks great too!
By the way TBird, I still want those wheels too...I just can afford them.
Tony, Yours looks great too!
By the way TBird, I still want those wheels too...I just can afford them.
TBird, those stripes look great! Now I wonder about putting my Karmann badges right onto one of the stripes rather than above the rocker panel......hmmmmm, perhaps some experimentation over the weekend.
And are those Mille Miglia EVO 5 wheels on your car? I had a set of those on another car of mine for a while - nice looking wheel for the Crossfire.
And are those Mille Miglia EVO 5 wheels on your car? I had a set of those on another car of mine for a while - nice looking wheel for the Crossfire.
Originally Posted by BLKFIN
T bird.....those look great! You could have those mass produced and sell them on the forum. I would buy a set!
I can make them up for you. Have a couple of different color combo's. I know they look the same in the pics, but they are actually two different color combo's. Have been trying to figure out which combo's look best on each color Crossfire. Always looking for volunteers,
My Aero Blue has a bright silver with a medium graphite pinstripe. Tony is the medium graphite with a dark graphite pinstripe. The lighter combination on the Black Crossfire just didn't look good.
I will probably have the site set something up in the vendor section, but for now, just send me a pm.
My Aero Blue has a bright silver with a medium graphite pinstripe. Tony is the medium graphite with a dark graphite pinstripe. The lighter combination on the Black Crossfire just didn't look good.
I will probably have the site set something up in the vendor section, but for now, just send me a pm.





