Jack & Accessories
Finally got around to checking the trunk for the jack. Here is a pic of what I found. The jack, a lug wrench and Chrysler inflation canister. Also the wrench for manually lowering the top. Should there be anything else?
Here is what I found in my trunk. All but the sliver wrench was included. I purchased it when I did not find one in the Glove Box as the manual had said it would be. The original question was the result of there being an approximately 5 x 3.5" cutout in the holder with nothing in it. Just wondered if there could be something missing. All my stuff appears to have never been used as the top wrench and inflation cylinder are still sealed in plastic.
Here it is. But... I saw a website recently that had brand new ones about $35~$40 but I cant remember where.
http://www.ebay.com/itm/MERCEDES-SLK300-SLK350-SLK55-R171-SPAR3E-WHEEL-AIR-COMPRESSOR-ASSEMBLY-OEM-/181749764570?hash=item2a512151da&vxp=mtr
http://www.ebay.com/itm/MERCEDES-SLK300-SLK350-SLK55-R171-SPAR3E-WHEEL-AIR-COMPRESSOR-ASSEMBLY-OEM-/181749764570?hash=item2a512151da&vxp=mtr
I'm at work so I can't take a picture of mine.
I found one online but for the life of me cannot figure out how to post it here.
Google Chrysler Crossfire factory tire inflation pump
and go to IMAGES.
The first one on the left, top row.
I found one online but for the life of me cannot figure out how to post it here.
Google Chrysler Crossfire factory tire inflation pump
and go to IMAGES.
The first one on the left, top row.
This thread inspired me to check and both cars have complete kits. The SRT6 coupe even has the tool for releasing the soft top. Go figure.
The empty hole on the right holds my manual and a flashlight, or a small flagon of scotch.
The empty hole on the right holds my manual and a flashlight, or a small flagon of scotch.
Mind you you can pull the grille off by hand and use a ball point pen on the stuck gear shift.
Here is what I found in my trunk. All but the sliver wrench was included. I purchased it when I did not find one in the Glove Box as the manual had said it would be. The original question was the result of there being an approximately 5 x 3.5" cutout in the holder with nothing in it. Just wondered if there could be something missing. All my stuff appears to have never been used as the top wrench and inflation cylinder are still sealed in plastic.
I assume you ordered the silver wrench that has the 5mm hex for the bow lock, the black one is the standard one that was supposed to be delivered with all roadsters.
I have the silver wrench also, really handy not to have to find the 5mm hex wrench anymore.
BTW. I keep a spare quart of Mobil1 in the right side cut-out.
One came with my new '04 and there was one with my SRT. It is mentioned in the owners hand book.
weekend that looks like it might fit in the opening for the original...
Air Compressor Slime : Target
And another from the same company that seems to be a little smaller...
Slime Power Sport 12 Volt Tire Inflator | 1 CFM Below Air Compressors| Northern Tool + Equipment
Thread
Thread Starter
Forum
Replies
Last Post
ala_xfire
Audio, Video and Electronics
3
Sep 28, 2015 05:51 PM
ritous1
Wheels, Brakes, Tires and Suspension
6
Sep 26, 2015 01:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



