Crossfire Roadster A place to post Roadster specific topics.

Floor Mats

Thread Tools
 
Old Apr 13, 2020 | 10:08 AM
  #1 (permalink)  
HazMatt's Avatar
Thread Starter
Joined: Mar 2019
Posts: 59
Likes: 1
From: GA
Default Floor Mats

I'm looking for Floor Mats for my 2005 Roadster LTD with some sort of logo on them to represent the vehicle. Not easy to find. Lloyd Mats seems good but very difficult to negotiate the site. Also, does anyone have a link to the available color combinations from 2005 for the LTD Roadster? Not sure if i have Black or Charcoal Black. Any help would be greatly appreciated.
 

Last edited by HazMatt; Apr 13, 2020 at 10:20 AM.
Reply
Old Apr 15, 2020 | 09:04 AM
  #2 (permalink)  
zip439's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,281
Likes: 469
From: SE Alabama
Default Re: Floor Mats

I have bought a set of Lloyd mates for each of my Crossfires. A "Black" set for the SRT6 is just too black; It just doesn't match all that well.
The set in my limited is a better match, but the color doesn't seem to be available any longer; it is #167 Dark Slat Gray.
Both sets are the "Ultimate" mate which is heavy and holds up very well.
If you are looking for a perfect match I would suggest get a sample piece sent to you in the Dark gray # 185 and the H. Graphite #126. That would give you a good reference.
 
Reply
Old Apr 15, 2020 | 09:09 AM
  #3 (permalink)  
HazMatt's Avatar
Thread Starter
Joined: Mar 2019
Posts: 59
Likes: 1
From: GA
Default Re: Floor Mats

Originally Posted by zip439
I have bought a set of Lloyd mates for each of my Crossfires. A "Black" set for the SRT6 is just too black; It just doesn't match all that well.
The set in my limited is a better match, but the color doesn't seem to be available any longer; it is #167 Dark Slat Gray.
Both sets are the "Ultimate" mate which is heavy and holds up very well.
If you are looking for a perfect match I would suggest get a sample piece sent to you in the Dark gray # 185 and the H. Graphite #126. That would give you a good reference.
Great info. I was worried about that! Thank you so much.
 
Reply
Old May 29, 2020 | 04:17 PM
  #4 (permalink)  
Goldwing's Avatar
Senior Member
Joined: Dec 2005
Posts: 2,822
Likes: 78
From: Holland MI
Default Re: Floor Mats

AutoAnything had mats with the Crossfire logo: Lloyd Ultimate Custom Floor Mats. $125/set back in 2011. SKU: 3355204

 
Reply
Old May 30, 2020 | 12:29 AM
  #5 (permalink)  
UrbanE's Avatar
Senior Member
Joined: Dec 2014
Posts: 1,252
Likes: 298
From: CA
Default Re: Floor Mats

Originally Posted by Goldwing
AutoAnything had mats with the Crossfire logo: Lloyd Ultimate Custom Floor Mats. $125/set back in 2011. SKU: 3355204

agreed these are great mats
but the fasteners they send are somewhat less than delightful. If you have a set of factory mats you can reuse the fasteners. They are way better and do a great job keeping the new mats in place.

You’ll have to overlay the original mats on the new ones and poke a hole through the new ones to accommodate the OEM clips.

added bonus the Lloyd mats can be embroidered with Chrysler or crossfire logo or both
 
Reply
Old May 30, 2020 | 07:59 AM
  #6 (permalink)  
zip439's Avatar
Senior Member
Joined: Jul 2010
Posts: 2,281
Likes: 469
From: SE Alabama
Default Re: Floor Mats

Originally Posted by UrbanE
agreed these are great mats
but the fasteners they send are somewhat less than delightful. If you have a set of factory mats you can reuse the fasteners. They are way better and do a great job keeping the new mats in place.

You’ll have to overlay the original mats on the new ones and poke a hole through the new ones to accommodate the OEM clips.

added bonus the Lloyd mats can be embroidered with Chrysler or crossfire logo or both
I personally prefer the tabs that came with my Llyod mats vice the OEM snaps. The tabs easily go into place and can be removed just as easily. I have a set in each car and the Limited has been there for well over seven years. The mats with the tabs stay in place and I have had no trouble with them not holding the mat . The OEM style snap on one of the post on a Mercedes I own has become so tight it has actually ripped out of the mat, and so now I have a nice round hole in the mat were the snap should be holding it tight.
 
Reply
Old May 30, 2020 | 10:31 AM
  #7 (permalink)  
Goldwing's Avatar
Senior Member
Joined: Dec 2005
Posts: 2,822
Likes: 78
From: Holland MI
Default Re: Floor Mats

Agree that the Lloyd mats fasteners are a little chintzy, but they work and who looks under the front of the seat anyway. I also removed my still almost-new-looking oem mats and stored them in the trunk to keep then pristine. I have no idea why because I have no plans to ever sell the car, but I guess if it ever appears on Mecum it will be nice to have those oem mats. And, yes, I did have the logo embroidered and also the black was a little darker than the rug. If they have a charcoal, it might be a better match.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FP
-C-I-C-C-I Discussion
25
Feb 20, 2010 01:46 PM
rcs8104
Crossfire Coupe
23
Jul 7, 2008 09:16 PM
andrew
Crossfire Coupe
5
May 8, 2007 12:16 PM
spensley
Troubleshooting & Technical Questions & Modifications
5
Feb 28, 2007 10:32 PM
mss400
Crossfire Coupe
13
Jan 23, 2007 01:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:24 AM.