CrossfireForum - The Chrysler Crossfire and SRT6 Resource

Crossfire SRT6 A place to discuss SRT-6 specific topics.

Aluminum Intake Manifolds for srt6

Thread Tools
 
Old Sep 24, 2008 | 03:10 AM
Share
  #421 (permalink)  
apkano's Avatar
Life is random...so am I.
Joined: Apr 2007
Posts: 3,433
Likes: 2
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
we made it to the track on saturday, it was 87f on the dashboard as we pulled in, first pass was a 1.85 60ft to a 12.15x@115.xx, i them turned the car over to liz to see how she could do, she ran consistant 12.34-12.37's all day with the most 60 ft's in the 1.98-2.02 range while breaking into the 116mph traps. im pretty sure this makes her the quickest/fastest female if that counts for anything, lol. looks like we have the fastest trap speed non nitrous on dragtimes. i was tryign to coach her on the launch to cut a sub 1.8 which should have went into the 11's btu it didnt happen, ill keep the car to myself when we get a cooler day
Consistent low 12's, no matter what driver. That says a lot about the car! Pretty impressive stuff!

Words cannot describe how pissed-off I was at work on Saturday. 19 hour day to do a 3 hour job! The UAW is nothing but a bunch of lazy *** mother ******* pieces of **** ****heads. No wonder the auto companies are going out of business!
 
Reply
0
Old Sep 24, 2008 | 06:39 AM
Share
  #422 (permalink)  
distantpulse's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
we made it to the track on saturday, it was 87f on the dashboard as we pulled in, first pass was a 1.85 60ft to a 12.15x@115.xx, i them turned the car over to liz to see how she could do, she ran consistant 12.34-12.37's all day with the most 60 ft's in the 1.98-2.02 range while breaking into the 116mph traps. im pretty sure this makes her the quickest/fastest female if that counts for anything, lol. looks like we have the fastest trap speed non nitrous on dragtimes. i was tryign to coach her on the launch to cut a sub 1.8 which should have went into the 11's btu it didnt happen, ill keep the car to myself when we get a cooler day
Was this with the mani's, pulley, tune, intake? Very nice MPH's!!! Wow, im excited! BTW, What plugs are you using??
 
Last edited by distantpulse; Sep 24, 2008 at 06:43 AM.
Reply
0
Old Sep 25, 2008 | 06:15 PM
Share
  #423 (permalink)  
SRTpowa's Avatar
Senior Member
Joined: Sep 2007
Posts: 961
Likes: 0
From: Shreveport Louisiana/BAFB
Default Re: Aluminum Intake Manifolds for srt6
Nice times rob! Were you using factory heat range plugs and did you open the cutouts?
 
Reply
0
Old Sep 25, 2008 | 06:53 PM
Share
  #424 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by distantpulse
Was this with the mani's, pulley, tune, intake? Very nice MPH's!!! Wow, im excited! BTW, What plugs are you using??
saturday we ran with our cai, IM's, asp pulley, inmotion tune, et streets and our prototype mani-back exhaust. im not convinced the new exhaust is more powerful then the cutouts as ill probably go to catless dp's with cutouts and the factory catback to regain drivabilty due to the new exh being too loud.

stock untouched plugs and wires still on the car
 
Reply
0
Old Sep 25, 2008 | 07:05 PM
Share
  #425 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,606
Likes: 39
From: IN
Default Re: Aluminum Intake Manifolds for srt6
that's one fast girlfriend you got there Rob....keep up the good work...I will continue to watch and learn...the F1's will difinitely help me get off the line...this car feels very quick from the hole now...just needed some grip...hopefully will get to try her out again before snow falls...LET may have another test and tune coming up in November...looking for the 12.3's or better...then, maybe down the road, the manifolds...but, like I said, watching and learning first...
 
Reply
0
Old Sep 25, 2008 | 07:12 PM
Share
  #426 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6
I got my mani's today, they look trick! I have not installed them yet but just wanted to say they look as described and I can't wait to get them installed fri. or sat and if it don't rain test them on Sunday at a local test and tune. Results to follow.....................
 
Reply
0
Old Sep 25, 2008 | 07:42 PM
Share
  #427 (permalink)  
distantpulse's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by MD SRT6
I got my mani's today, they look trick! I have not installed them yet but just wanted to say they look as described and I can't wait to get them installed fri. or sat and if it don't rain test them on Sunday at a local test and tune. Results to follow.....................
Nice! How did you get yours so early!? I thought they weren't shipping till the first? Hopefully I can get mine in time.
 
Reply
0
Old Sep 25, 2008 | 07:48 PM
Share
  #428 (permalink)  
distantpulse's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
saturday we ran with our cai, IM's, asp pulley, inmotion tune, et streets and our prototype mani-back exhaust. im not convinced the new exhaust is more powerful then the cutouts as ill probably go to catless dp's with cutouts and the factory catback to regain drivabilty due to the new exh being too loud.

stock untouched plugs and wires still on the car
Very nice! I'm Definately taking these plugs out of my car! I thought I was buying a 1 step colder plug, but in actuality it is a 2 step colder plug. it's running waaay too rich and not running nearly what it used to so......out they come!
 
Reply
0
Old Sep 26, 2008 | 03:13 AM
Share
  #429 (permalink)  
apkano's Avatar
Life is random...so am I.
Joined: Apr 2007
Posts: 3,433
Likes: 2
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
saturday we ran with our cai, IM's, asp pulley, inmotion tune, et streets and our prototype mani-back exhaust. im not convinced the new exhaust is more powerful then the cutouts as ill probably go to catless dp's with cutouts and the factory catback to regain drivabilty due to the new exh being too loud.

stock untouched plugs and wires still on the car
That's not really too loud. Well........I guess it is pretty loud when you have it floored on the I-696 on-ramp! I still like the sound though, wish mine was a little louder. You should put up a better sound clip.......you might find a bunch of people who really like the sound!


Originally Posted by oledoc2u
that's one fast girlfriend you got there Rob....keep up the good work...I will continue to watch and learn...the F1's will difinitely help me get off the line...this car feels very quick from the hole now...just needed some grip...hopefully will get to try her out again before snow falls...LET may have another test and tune coming up in November...looking for the 12.3's or better...then, maybe down the road, the manifolds...but, like I said, watching and learning first...
November is a great month for turning in some good times. Cold, dense, crisp air will do wonders for your quarter mile times!
 
Reply
0
Old Sep 26, 2008 | 09:38 AM
Share
  #430 (permalink)  
SRTpowa's Avatar
Senior Member
Joined: Sep 2007
Posts: 961
Likes: 0
From: Shreveport Louisiana/BAFB
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by MD SRT6
I got my mani's today, they look trick! I have not installed them yet but just wanted to say they look as described and I can't wait to get them installed fri. or sat and if it don't rain test them on Sunday at a local test and tune. Results to follow.....................
11's no N20 and 10's on the juice! Good luck!
 
Reply
0
Old Sep 26, 2008 | 07:54 PM
Share
  #431 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by distantpulse
Nice! How did you get yours so early!? I thought they weren't shipping till the first? Hopefully I can get mine in time.
Quick full pay I guess? LOL, I was hoping to run them this Sun. but rain is in the forecast, the first time they run maybe on the 12th.? We may see them together!
 
Reply
0
Old Oct 1, 2008 | 09:25 PM
Share
  #432 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6
1. jonnyangel04
2. tom2112 DEPOSIT
3. BLUEMDsrt6 DEPOSIT
4. distantpulse PAID
5. SRT6-Man DEPOSIT
6. Lars DEPOSIT
7.ImportLabSRT DEPOSIT
8. incognito PAID
9. jeff PAID - SHIPPED
10. jim PAID
11. svo PAID
12. srtpowa
13. indyjoe DEPOSIT
14. dstuart DEPOSIT
15. Cal_Cobra
 
Last edited by NeedsWings; Oct 1, 2008 at 10:33 PM.
Reply
0
Old Oct 2, 2008 | 04:40 AM
Share
  #433 (permalink)  
distantpulse's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,535
Likes: 0
From: Southern NJ
Default Re: Aluminum Intake Manifolds for srt6
Ship, ship, ship, ship!!!
 
Reply
0
Old Oct 2, 2008 | 07:26 AM
Share
  #434 (permalink)  
ohnoesaz's Avatar
Forum Regular
Joined: Jul 2008
Posts: 392
Likes: 0
From: Tucson, AZ
Default Re: Aluminum Intake Manifolds for srt6
This thread is a true demonstration of the downward spiral process known as addiction.

Keep it coming.
 
Reply
0
Old Oct 2, 2008 | 02:41 PM
Share
  #435 (permalink)  
SRTpowa's Avatar
Senior Member
Joined: Sep 2007
Posts: 961
Likes: 0
From: Shreveport Louisiana/BAFB
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
1. jonnyangel04
2. tom2112 DEPOSIT
3. BLUEMDsrt6 DEPOSIT
4. distantpulse PAID
5. SRT6-Man DEPOSIT
6. Lars DEPOSIT
7.ImportLabSRT DEPOSIT
8. incognito PAID
9. jeff PAID - SHIPPED
10. jim PAID
11. svo PAID
12. srtpowa
13. indyjoe DEPOSIT
14. dstuart DEPOSIT
15. Cal_Cobra
Sent you my deposit?
 
Reply
0
Old Oct 2, 2008 | 04:04 PM
Share
  #436 (permalink)  
svo's Avatar
svo
Forum Regular
Joined: Jul 2007
Posts: 528
Likes: 0
Default Re: Aluminum Intake Manifolds for srt6
Originally Posted by NeedsWings
1. jonnyangel04
2. tom2112 DEPOSIT
3. BLUEMDsrt6 DEPOSIT
4. distantpulse PAID
5. SRT6-Man DEPOSIT
6. Lars DEPOSIT
7.ImportLabSRT DEPOSIT
8. incognito PAID
9. jeff PAID - SHIPPED
10. jim PAID
11. svo PAID
12. srtpowa
13. indyjoe DEPOSIT
14. dstuart DEPOSIT
15. Cal_Cobra
Sick Bastards!!
 
Reply
0
Old Oct 2, 2008 | 04:27 PM
Share
  #437 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,606
Likes: 39
From: IN
Default Re: Aluminum Intake Manifolds for srt6
that's why I am just watching....not quite in the adictive state yet...but, I am waivering a little...
 
Reply
0
Old Oct 2, 2008 | 05:53 PM
Share
  #438 (permalink)  
tom2112's Avatar
She can ride with me ;)
Joined: Sep 2007
Posts: 3,399
Likes: 3
From: Sharon, PA
Default Re: Aluminum Intake Manifolds for srt6
Hello, my name is Tom, and I'm a boost-aholic.
 
Reply
0
Old Oct 2, 2008 | 08:38 PM
Share
  #439 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6
were working on them, i know you guys want everythign yesterday

"Hello, i'm Rob, and i'm also addicted to modifying cars"
 
Reply
0
Old Oct 2, 2008 | 10:00 PM
Share
  #440 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6
1. jonnyangel04
2. tom2112 DEPOSIT
3. BLUEMDsrt6 DEPOSIT
4. distantpulse PAID
5. SRT6-Man DEPOSIT
6. Lars DEPOSIT
7.ImportLabSRT DEPOSIT
8. incognito PAID
9. jeff PAID - SHIPPED
10. jim PAID
11. svo PAID
12. srtpowa DEPOSIT
13. indyjoe DEPOSIT
14. dstuart DEPOSIT
15. Cal_Cobra
 
Reply
0



Advanced Search

All times are GMT -4. The time now is 05:38 AM.