Crossfire SRT6 A place to discuss SRT-6 specific topics.

Aluminum Intake Manifolds for srt6

Thread Tools
 
Old Oct 17, 2008 | 03:45 PM
  #461 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by Eleventeen
Is there still time to get in on the first run at the introductory price? If not, when and how much will the second run be? Thanks!
first run is already accounted for, after that they will be 1500-1600

here is a picture before cleanup and coating with where we will put the supercharged emblems (for those that want them)
 
Attached Images
File Type: jpg
superchargedontop.jpg (267.4 KB, 84 views)
Reply
Old Oct 17, 2008 | 03:53 PM
  #462 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6

These mani's are awesome! If I could only give one suggestion, put the bung in the drivers side mani, as this would be the closest route to the pillar where gauges will be mounted( I had to cut and splice my wiring to make it stretch that far ). Otherwise after driving a while with them I feel I have more power now, I think the four runs I had last Sunday wasn't enough time for the computer to fully adjust. This thing is flying now!!!! I'm real excited to go back out with these and the colder weather, lookout record book!
 
Reply
Old Oct 17, 2008 | 03:57 PM
  #463 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by MD SRT6
These mani's are awesome! If I could only give one suggestion, put the bung in the drivers side mani, as this would be the closest route to the pillar where gauges will be mounted( I had to cut and splice my wiring to make it stretch that far ). Otherwise after driving a while with them I feel I have more power now, I think the four runs I had last Sunday wasn't enough time for the computer to fully adjust. This thing is flying now!!!! I'm real excited to go back out with these and the colder weather, lookout record book!
if someone wants it there thats not a problem, let me know asap tho. we have it on the pass side as thats where all our wiring for the zeitronix is at (wideband afr, boost, rpm, tps, switchable power, ground, ect). it also leaves the sensor hidden under the cai.

again its just as easy to be on the drivers side if anyone would prefer it
 
Reply
Old Oct 17, 2008 | 06:50 PM
  #464 (permalink)  
apkano's Avatar
Life is random...so am I.
Joined: Apr 2007
Posts: 3,433
Likes: 2
Default Re: Aluminum Intake Manifolds for srt6

So, when's the next trip to the strip locally?

I feel the need to have my a** handed to me again!
 
Reply
Old Oct 17, 2008 | 08:01 PM
  #465 (permalink)  
tom2112's Avatar
She can ride with me ;)
Joined: Sep 2007
Posts: 3,399
Likes: 3
From: Sharon, PA
Default Re: Aluminum Intake Manifolds for srt6

Sadly tomorrow is the last track day near me until spring.
I won't get a chance to spank the locals with my new mani's.
But that's OK, I still can't wait to drive it with them installed.
 
Reply
Old Oct 18, 2008 | 05:14 AM
  #466 (permalink)  
apkano's Avatar
Life is random...so am I.
Joined: Apr 2007
Posts: 3,433
Likes: 2
Default Re: Aluminum Intake Manifolds for srt6

Come back up to Michigan.......Milan dragway is open till mid November!


Should be some nice cold temps then.......maybe even a record or two broken!
 
Reply
Old Oct 25, 2008 | 06:31 PM
  #467 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6

I'm going to the track Sunday with the engine set up for these mani's, all motor spark plug gap, all motor 100 octane tune from Inmotion, so we will know exactly what they gain. My best run on motor prior to mani's was 11.95, with mani's at the MIR challenge 11.92 ( My spark plugs were set up for nitrous, which means .030 gap ) So Sunday is supposed to be 65 degrees and we can see just what the gain is. I will report back soon.
 
Reply
Old Oct 25, 2008 | 07:19 PM
  #468 (permalink)  
cruzinquick's Avatar
Senior Member
Joined: Sep 2007
Posts: 2,535
Likes: 4
From: AZ
Default Re: Aluminum Intake Manifolds for srt6

Good luck, I'm coming after that record as well. Hopefully in a few weeks.
 
Reply
Old Oct 26, 2008 | 09:26 AM
  #469 (permalink)  
tom2112's Avatar
She can ride with me ;)
Joined: Sep 2007
Posts: 3,399
Likes: 3
From: Sharon, PA
Default Re: Aluminum Intake Manifolds for srt6

Just checking, but did I miss a post where it said the mani's were done and we should send in the rest of the cash?
 
Reply
Old Oct 26, 2008 | 11:26 AM
  #470 (permalink)  
svo's Avatar
svo
Forum Regular
Joined: Jul 2007
Posts: 528
Likes: 0
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by tom2112
Just checking, but did I miss a post where it said the mani's were done and we should send in the rest of the cash?
You missed the post where only the first 5 were sent out to those first 5 who had paid first - the rest are going to have to wait 3 months... JUST KIDDING!!! Yes, I guess you did miss to send in the rest, but they hae not shipped yet - I'm guessing any day now.
 
Reply
Old Oct 26, 2008 | 04:05 PM
  #471 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6

Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!

Best time without mani's- 11.95 @ 113.09 90 degrees

First time out with mani's 11.92 @ 115.82 86 degrees

Today @ capitol Raceway 11.84 @ 117.51 78 degrees

Next Month when temps are in the 50's = gonna be priceless


Time slip

R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
 
Reply
Old Oct 26, 2008 | 04:11 PM
  #472 (permalink)  
BLKFIN's Avatar
ADDICTED TO BOOST
Joined: May 2005
Posts: 1,625
Likes: 1
From: McKinney, TX
Default Re: Aluminum Intake Manifolds for srt6

That is AWESOME....Congrats!
 
Reply
Old Oct 26, 2008 | 04:13 PM
  #473 (permalink)  
svo's Avatar
svo
Forum Regular
Joined: Jul 2007
Posts: 528
Likes: 0
Default Re: Aluminum Intake Manifolds for srt6

SWEET!!

What all are your mods again? And I'm assuming this is on drags?


GREAT TIMES!
 
Reply
Old Oct 26, 2008 | 04:16 PM
  #474 (permalink)  
mrphotoman's Avatar
Senior Member
Joined: Feb 2008
Posts: 3,665
Likes: 5
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by MD SRT6
Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!

Best time without mani's- 11.95 @ 113.09 90 degrees

First time out with mani's 11.92 @ 115.82 86 degrees

Today @ capitol Raceway 11.84 @ 117.51 78 degrees

Next Month when temps are in the 50's = gonna be priceless


Time slip

R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
wow that is great, was that with your plugs regapped?
 
Reply
Old Oct 26, 2008 | 04:19 PM
  #475 (permalink)  
MD SRT6's Avatar
Joined: Oct 2007
Posts: 544
Likes: 0
From: Maryland
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by mrphotoman
wow that is great, was that with your plugs regapped?
Yes gapped them to .035 + the 100 octane tune from inmotion.
 
Reply
Old Oct 26, 2008 | 04:24 PM
  #476 (permalink)  
SRT6-Man's Avatar
Joined: Jun 2007
Posts: 270
Likes: 0
From: Minnesota
Default Re: Aluminum Intake Manifolds for srt6

Originally Posted by MD SRT6
Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!

Best time without mani's- 11.95 @ 113.09 90 degrees

First time out with mani's 11.92 @ 115.82 86 degrees

Today @ capitol Raceway 11.84 @ 117.51 78 degrees

Next Month when temps are in the 50's = gonna be priceless


Time slip

R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Thats one mean SRT6.
 
Reply
Old Oct 26, 2008 | 05:27 PM
  #477 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6

congrats jeff for bumping the record once again, i see 11.70's for ya with cool weather, keep up the good work!
 
Reply
Old Oct 26, 2008 | 06:24 PM
  #478 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,606
Likes: 39
From: IN
Default Re: Aluminum Intake Manifolds for srt6

man, manis...I see my Xmas passing by me....Rob, I will ask for cash from Santa.....
 
Reply
Old Oct 26, 2008 | 06:39 PM
  #479 (permalink)  
Eleventeen's Avatar
Joined: May 2008
Posts: 118
Likes: 0
From: Voorhees, NJ
Default Re: Aluminum Intake Manifolds for srt6

Wow, you picked up 4 MPH! That's a nice power gain.
 
Reply
Old Nov 6, 2008 | 09:56 AM
  #480 (permalink)  
NeedsWings's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2007
Posts: 2,761
Likes: 194
From: Michigan
Default Re: Aluminum Intake Manifolds for srt6

ok, just got back the new y pipe tinted to match the cai silver, the same color we are getting most of the manifolds tinted, here is a color comparisson, its not perfect but very close between the teflon and powdercoat used on our CAI's. the first wave of manifolds are now at the front of the line there and im hoping to get them out friday assuming we get them back early enough in the day. we cancelled our trip to vegas today/tomorrow for the SEMA show in order to make as much progress as possible on these for you guys.
 
Attached Images
File Type: jpg
silverteflon.jpg (231.3 KB, 42 views)
Reply



All times are GMT -4. The time now is 04:34 AM.