Ok, I installed Rotex Gold pads on all four corners today using Andrew's steps. Thanks Andrew! However, I noticed that in Andrew's rear pad install steps, he mentions removing the sensors. Not sure if it's an SRT thing, but I don't have any pad sensors on the rear. The pads have the indention for the sensor, but no sensor. There aren't any wires or anything indicating that there ever were sensors for the rear. Can anyone clarify?

Also, just an update, in Andrew's steps, he says to use a 7mm allen. Again, it may be different on SRTs, but the bolts on mine were Torx, T-40 I believe.

Once I did the first one, the rest were really easy! I'll let you know how they work since these were purchased from the Ebay guy.

 

I only changed the fronts- so dont know about the sensors on the rear but the bolts are Torx on mine.
I put on Posi-Quiets, which by the way are exactly same as Rotex Gold, same manufacturer same specs.

 

I haven't changed mine yet, but did have my back wheels off and brakes off and didn't see one either.

 

Back doesnt have sensors on SRT6's

 

Ok, thanks for the clarification!

 

I bedded in the brakes today and drove about 100 miles. No brake dust whatsoever on the wheels! They work great!

 

what sensors are we talking about here?

 

Brake pad wear sensors