Mercedes Brembo 4 piston calipers
Join Date: Aug 2007
Location: Lantana, Republic of Texas
Age: 65
Posts: 3,084
Likes: 0
Received 7 Likes
on
7 Posts
Mercedes Brembo 4 piston calipers
Hello SRT folks, I was working on a big brake upgrade and ended up with something you all may be interested in. In case you haven't seen the C32 brake thread. While the C32 brakes are a bolt on swap, I ended up getting a great deal on similar calipers from a CL500 which reguired the use of 330mm SRT-6 rotors instead of the 345mm C32 rotors. So if any of you guys would prefer four piston Brembo calipers, they will bolt on with your stock rotors and will work great on your cars. See my last post on the C32 brake thread to see how it is done. These are the calipers your cars should have come with.
Re: Mercedes Brembo 4 piston calipers
KitFox,
Good luck. I have been looking since Lantana started this project and I finally was able to find a set this week. On MBworld anyone who had them thought that the National debt was based upon them as the standard. I found mine on eBay.
Good luck my friend and happy hunting.
Stay safe...
Respectfully,
Paul (MisterTaz)
Good luck. I have been looking since Lantana started this project and I finally was able to find a set this week. On MBworld anyone who had them thought that the National debt was based upon them as the standard. I found mine on eBay.
Good luck my friend and happy hunting.
Stay safe...
Respectfully,
Paul (MisterTaz)
Join Date: Aug 2007
Location: Lantana, Republic of Texas
Age: 65
Posts: 3,084
Likes: 0
Received 7 Likes
on
7 Posts
Re: Mercedes Brembo 4 piston calipers
Originally Posted by Kit Fox
Now where can we get them from?
http://www.brembo.com/ENG/catalogo_AM/2007/index.html
Here are some:
http://cgi.ebay.com/ebaymotors/Bremb...Q5fAccessories
Last edited by LantanaTX; 04-19-2009 at 08:27 AM.
Join Date: Aug 2007
Location: Lantana, Republic of Texas
Age: 65
Posts: 3,084
Likes: 0
Received 7 Likes
on
7 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)