Crossfire SRT6 A place to discuss SRT-6 specific topics.

I think I found it...

Thread Tools
 
Old Feb 27, 2010 | 03:47 PM
  #1 (permalink)  
MikeR's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Default I think I found it...

I have been fighting with a intermittant no start issue on the Aero for over a year. With some help from the guys here I narrowed it down to an unidentified load that was putting my voltage at under 10V when starting. I have also had a problem with my courtesy lamps in that when I have them enabled to come on when the door opens, they are always on and the trunk lamp is also on. So I have just had the switch off.

So today I decided to go find out which switch was not working and making them stay on. It was the trunk latch switch. It is broken and indicates that the trunk is always open. I unplugged the switch so now it thinks it is always closed and the courtesy lamps work just like you would want them too.

Next I got the meter out and tested the voltage when starting... 11V+!! Starts every time. Fires right off, just like it should.

Now I just need to buy a new latch... the switch is built in of course.
 
Reply
Old Feb 27, 2010 | 03:49 PM
  #2 (permalink)  
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: I think I found it.....

dont the small things just drive you crazy!? easier to diagnose a broken engine than a smakll electrical issue!
 
Reply
Old Feb 27, 2010 | 03:50 PM
  #3 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: I think I found it.....

Originally Posted by MikeR
I have been fighting with a intermittant no start issue on the Aero for over a year. With some help from the guys here I narrowed it down to an unidentified load that was putting my voltage at under 10V when starting. I have also had a problem with my courtesy lamps in that when I have them enabled to come on when the door opens, they are always on and the trunk lamp is also on. So I have just had the switch off.

So today I decided to go find out which switch was not working and making them stay on. It was the trunk latch switch. It is broken and indicates that the trunk is always open. I unplugged the switch so now it thinks it is always closed and the courtesy lamps work just like you would want them too.

Next I got the meter out and tested the voltage when starting... 11V+!! Starts every time. Fires right off, just like it should.

Now I just need to buy a new latch... the switch is built in of course.
Nice investigation Mike....solving the illusive no start...dang cars have way too many safe guards for me...lol
 
Reply
Old Feb 27, 2010 | 04:19 PM
  #4 (permalink)  
Franc Rauscher's Avatar
Senior Member
Joined: Mar 2008
Posts: 8,498
Likes: 1,122
From: St Louis MO
Default Re: I think I found it.....

Originally Posted by oledoc2u
Nice investigation Mike....solving the illusive no start...dang cars have way too many safe guards for me...lol
Me too. I remember when......oh never mind.

It's always something! And always the last place you looked.

Good work there Mike.
I'll add it to the "might be this" list.
roadster with a stick
 
Reply
Old Feb 27, 2010 | 05:52 PM
  #5 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 23
From: Chicago, IL
Default Re: I think I found it...

That's great news Mike. Glad you got that figured out because I know it was giving you the beef for a long, long time. BTW, you get a chance to swap out that bad TB connector with the one I sent you with those washers? How'd everything go?
 
Reply
Old Feb 27, 2010 | 07:54 PM
  #6 (permalink)  
hcarter's Avatar
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 6
From: Kingsport Tn.
Default Re: I think I found it...

Originally Posted by MikeR
I have been fighting with a intermittant no start issue on the Aero for over a year. With some help from the guys here I narrowed it down to an unidentified load that was putting my voltage at under 10V when starting. I have also had a problem with my courtesy lamps in that when I have them enabled to come on when the door opens, they are always on and the trunk lamp is also on. So I have just had the switch off.

So today I decided to go find out which switch was not working and making them stay on. It was the trunk latch switch. It is broken and indicates that the trunk is always open. I unplugged the switch so now it thinks it is always closed and the courtesy lamps work just like you would want them too.

Next I got the meter out and tested the voltage when starting... 11V+!! Starts every time. Fires right off, just like it should.

Now I just need to buy a new latch... the switch is built in of course.
Mike my courtesy lights stay on also all the time unless i cut the switch off what should i look for on the switch in trunk actual crack or just a bad swich and do you think this could also effect the operation of the top ???

thanks Howard
 
Reply
Old Feb 27, 2010 | 08:13 PM
  #7 (permalink)  
MikeR's Avatar
Thread Starter
|
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Default Re: I think I found it...

Howard,
You will have to test the switch with a meter to see if it is working. Just remove the latch and manually latch and unlacth it while checking pins 1 and 2. There are three pins but only 1 & 2 get connected to the harness.

I couldnt even guess if it would affect the convertible top...
 
Reply
Old Feb 27, 2010 | 09:16 PM
  #8 (permalink)  
rcompart's Avatar
Senior Member
Joined: Apr 2008
Posts: 3,178
Likes: 23
From: Chicago, IL
Default Re: I think I found it...

Originally Posted by hcarter
Mike my courtesy lights stay on also all the time unless i cut the switch off what should i look for on the switch in trunk actual crack or just a bad swich and do you think this could also effect the operation of the top ???

thanks Howard
If the trunk isn't latched closed, the top will not operate. This prevents the trunk and the convertible cover sheet metal from coming into contact with one another.
 
Reply
Old Feb 28, 2010 | 12:43 AM
  #9 (permalink)  
tighed1's Avatar
Senior Member
Joined: Aug 2008
Posts: 5,741
Likes: 98
From: Sierra Vista, Arizona
Default Re: I think I found it...

Nice troubleshooting there Mike.
Gonna have to keep this one in the ol' memory blank incase I see similar symptoms.
 
Reply
Old Feb 28, 2010 | 09:30 AM
  #10 (permalink)  
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,599
Likes: 34
From: IN
Default Re: I think I found it...

Originally Posted by tighed1
Nice troubleshooting there Mike.
Gonna have to keep this one in the ol' memory blank incase I see similar symptoms.
Exactly.......
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
franklindm
Troubleshooting & Technical Questions & Modifications
12
Mar 14, 2020 12:23 PM
MiamiTVR
Crossfire SRT6
11
Jan 30, 2016 02:15 PM
Sweet2002
Crossfire SRT6
0
Sep 25, 2015 02:16 AM
Selbyl
Troubleshooting & Technical Questions & Modifications
2
Sep 22, 2015 09:31 PM
BlackJax-SRT
Southeast Forum
1
Sep 17, 2015 03:03 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 12:43 PM.