Feeler SSB SRT6 for sale
Just came back from spending vacation with my uncle in Idaho. He gave me great news on the family heirloom I've been waiting on for quite some time. He going to give me the 55. So the time to start making room is coming. From someone who has owned over 50 cars in the past 10 years, owning the SRT for 3 years is a testament to how fun this car is. The 55' is the only car that I've said all along that will fill it's shoes. It's been in the family 52 yrs. Here I am firing it up.
Ok I've been asked what's my number and took me a while so here it is. Completely Stock with Warranty $18k, Modded with everything included $21k. I've listed prices on everything you could purchase today on my list and it's just over $8700 and doesn't include any shipping or labor. Ouch...but was worth every penny
Here is what I have either together or parting out.
SRT6 with nav and original conti's. Purchased July 07 with 212 miles
Registered with Chrysler as original owner.
New Navigation discs in plastic
Original owners manuals
Currently has 9,240 miles
Chrysler Service Contract up to 50k/or Feb 2014 zero ded $1200
I changed oil every 1000-1500 miles beginning at 2000 miles.
I changed serpentine belt twice so far because car sits during summer
NW dual CAI teflon coated inside/out silver $800
NW Mani's teflon coated inside/out silver $1500
NW YPipe teflon coated inside/out silver $225
Valve Covers teflon coated inside/out silver $250
ASP 178 pulley kit $970
InMotion custom tune $500
Zietronix Zt-2 $280
Zietronix Boost Sensor installed on CAI $120
o2 sensor installed on passenger exhaust
Bosch IC pump replaced as precautionary $130
Factory air box
Factory pullies
Factory SRT6 mani's
Factory Bosch pump (worked fine)
Factory YPipe
Elbows for NW single CAI
Extra serpentine belt
2- 16x7 E500 wheels with 255/50-16" Mickey Thompsons DR's almost new $600
2- 16x8 ML wheels with 255/50-16" Hoosier DR's approx 50% left $600
4- 15mm spacers to use stock lugs with drag radial setup $100
What I have new in plastic or packaging
SRT6 Luggage $350
factory floor mats
2- 19" Michelin PS2 rear tires $700
3- Mann oil filters with O rings $30
3- oil plug washers $3
2- supercharger bearings $110
1- LET 19000 rpm water pump pulley bearing
1- Supercharger Plaque never installed $10
2- SRT6 Supercharged side emblems aluminum never installed $10
1- SRT6 dash plaque never installed $10
1- set of rear brake pads $60
NW Power Steering line relocation kit $70
Intake Manifold Bolt Kit $50
K&N Extreme Filter $50
K&N Replacement Filter $38
Intake Manifold Cork Gaskets $20
What has been replaced under warranty
Headlights - both replaced
Fuel Pump
Drivers door lock mechanism
Transmission TSB leak
What needs to be replaced under warranty
Hood shock- I don't trust the dealerships around here so haven't taken in.
History of car
It's the fastest ASP 178 pullied car not on spray. 11.86 and still has more in it with the right conditions. I have raced this car at the track for the past 3 years. I have numerous videos on youtube. I am meticulous about the maintenance and preparation of my car. Everything has to be perfect or I don't run it. Never had leaning issues with tune. Have plenty of datalogs to prove it. I only ran the best products and best tune available along with 100 octane fuel. This car has been spoiled with the best.
The only irreversible modification is the o2 sensor. Besides that there isn't a hole drilled into the car.
If your in AZ and want to come by just shoot me a PM. It's too hot right now to do anything, so will be sitting for the summer.
Ok I've been asked what's my number and took me a while so here it is. Completely Stock with Warranty $18k, Modded with everything included $21k. I've listed prices on everything you could purchase today on my list and it's just over $8700 and doesn't include any shipping or labor. Ouch...but was worth every penny
Here is what I have either together or parting out.
SRT6 with nav and original conti's. Purchased July 07 with 212 miles
Registered with Chrysler as original owner.
New Navigation discs in plastic
Original owners manuals
Currently has 9,240 miles
Chrysler Service Contract up to 50k/or Feb 2014 zero ded $1200
I changed oil every 1000-1500 miles beginning at 2000 miles.
I changed serpentine belt twice so far because car sits during summer
NW dual CAI teflon coated inside/out silver $800
NW Mani's teflon coated inside/out silver $1500
NW YPipe teflon coated inside/out silver $225
Valve Covers teflon coated inside/out silver $250
ASP 178 pulley kit $970
InMotion custom tune $500
Zietronix Zt-2 $280
Zietronix Boost Sensor installed on CAI $120
o2 sensor installed on passenger exhaust
Bosch IC pump replaced as precautionary $130
Factory air box
Factory pullies
Factory SRT6 mani's
Factory Bosch pump (worked fine)
Factory YPipe
Elbows for NW single CAI
Extra serpentine belt
2- 16x7 E500 wheels with 255/50-16" Mickey Thompsons DR's almost new $600
2- 16x8 ML wheels with 255/50-16" Hoosier DR's approx 50% left $600
4- 15mm spacers to use stock lugs with drag radial setup $100
What I have new in plastic or packaging
SRT6 Luggage $350
factory floor mats
2- 19" Michelin PS2 rear tires $700
3- Mann oil filters with O rings $30
3- oil plug washers $3
2- supercharger bearings $110
1- LET 19000 rpm water pump pulley bearing
1- Supercharger Plaque never installed $10
2- SRT6 Supercharged side emblems aluminum never installed $10
1- SRT6 dash plaque never installed $10
1- set of rear brake pads $60
NW Power Steering line relocation kit $70
Intake Manifold Bolt Kit $50
K&N Extreme Filter $50
K&N Replacement Filter $38
Intake Manifold Cork Gaskets $20
What has been replaced under warranty
Headlights - both replaced
Fuel Pump
Drivers door lock mechanism
Transmission TSB leak
What needs to be replaced under warranty
Hood shock- I don't trust the dealerships around here so haven't taken in.
History of car
It's the fastest ASP 178 pullied car not on spray. 11.86 and still has more in it with the right conditions. I have raced this car at the track for the past 3 years. I have numerous videos on youtube. I am meticulous about the maintenance and preparation of my car. Everything has to be perfect or I don't run it. Never had leaning issues with tune. Have plenty of datalogs to prove it. I only ran the best products and best tune available along with 100 octane fuel. This car has been spoiled with the best.
The only irreversible modification is the o2 sensor. Besides that there isn't a hole drilled into the car.
If your in AZ and want to come by just shoot me a PM. It's too hot right now to do anything, so will be sitting for the summer.
Last edited by cruzinquick; Jul 11, 2010 at 01:01 AM.
Originally Posted by ModlessG
Now that's a 55. Congrats
Wow! - That's like the 5th fully modded SRT6 up for sale in the last 3 months
Good luck on the sale and congratulations on the 55...
Good luck on the sale and congratulations on the 55...
Originally Posted by BrianBrave
Wow! - That's like the 5th fully modded SRT6 up for sale in the last 3 months
Good luck on the sale and congratulations on the 55...
Good luck on the sale and congratulations on the 55...
The main difference between my car and the others is they were chasing me. I'm still chasing MD's memory.
Originally Posted by SparkieSRT6
The 55 belair sounds amazing.
Dibs on the Dual Needswing Intake if possible???
Dibs on the Dual Needswing Intake if possible???
Not parting out just yet, will start a new thread if I decide to go in that direction. Seems these cars sell for the same money completely stock.
Keep the crossfire and the chevy. I did.
100_0182.jpg
I gotta ask. Is that 55 chevy still running the stock drum brakes and single master cylinder or was I seeing things?
100_0182.jpg
I gotta ask. Is that 55 chevy still running the stock drum brakes and single master cylinder or was I seeing things?
Originally Posted by glockster
Keep the crossfire and the chevy. I did.

I gotta ask. Is that 55 chevy still running the stock drum brakes and single master cylinder or was I seeing things?

I gotta ask. Is that 55 chevy still running the stock drum brakes and single master cylinder or was I seeing things?

Originally Posted by cruzinquick
What I have new in plastic or packaging
Originally Posted by cruzinquick
SRT6 Luggage
factory floor mats
2- 19" Michelin PS2 rear tires
3- Mann oil filters with O rings
3- oil plug washers
2- supercharger bearings
1- LET 19000 rpm water pump pulley bearing
1- Supercharger Plaque never installed
2- SRT6 Supercharged side emblems never installed
1- SRT6 dash plaque never installed
1- set of rear brake pads
factory floor mats
2- 19" Michelin PS2 rear tires
3- Mann oil filters with O rings
3- oil plug washers
2- supercharger bearings
1- LET 19000 rpm water pump pulley bearing
1- Supercharger Plaque never installed
2- SRT6 Supercharged side emblems never installed
1- SRT6 dash plaque never installed
1- set of rear brake pads
Can you mail me mine? Doesn't look like I'm gonna make it up your way.
Good luck with the sale!
Originally Posted by tighed1
Sure hope those aren't my bearings!
Can you mail me mine? Doesn't look like I'm gonna make it up your way.
Good luck with the sale!
Originally Posted by 32krazy!
ill take the other 2 s/c bearings. pm me a price w/shipping to 37128
quote=cruzinquick]It sure does. I would keep the SRT6, but already have a 68' Chevy P/U, 63' Nova, and a 65' Rambler Marlin. I'm selling the Marlin, but not sure about the others. I've had the nova since 93', and the truck I built for my dad who passed 2 yrs ago. Both the nova and the 68' have the disc brake upgrade. The 55' would get them right out of the gate. That's only because I started making room to get to this point a year ago. Sold my 67' Camaro and 55' 2dr hardtop. Trying to narrow down to 2 cars for just fun.[/quote]
I couldn't keep just 2 so I built a bigger garage.
106_2767.jpg
And what I keep inside it.
106_2769.jpg
State Farm loves me.
I couldn't keep just 2 so I built a bigger garage.
106_2767.jpg
And what I keep inside it.
106_2769.jpg
State Farm loves me.
Originally Posted by glockster
quote=cruzinquick]It sure does. I would keep the SRT6, but already have a 68' Chevy P/U, 63' Nova, and a 65' Rambler Marlin. I'm selling the Marlin, but not sure about the others. I've had the nova since 93', and the truck I built for my dad who passed 2 yrs ago. Both the nova and the 68' have the disc brake upgrade. The 55' would get them right out of the gate. That's only because I started making room to get to this point a year ago. Sold my 67' Camaro and 55' 2dr hardtop. Trying to narrow down to 2 cars for just fun.
And what I keep inside it.
State Farm loves me.
I would love that if I had the land. My in-laws do and I've kept project cars over there for many years. I asked about building a garage there, but they didn't like the idea. So I let it go. Don't have the option of moving and not enough room for a garage that would make me happy at my place. Wish I was out in the country with no HOA's. It's a disease collecting cars, I had to bite my tongue on the way back from Idaho. Seen a Typhoon for $6k that would of been a nice addition. On insurance for the cars I use Hagerty, very cheap.
Originally Posted by cruzinquick
History of car
It's the fastest ASP 178 pullied car not on spray. 11.86 and still has more in it with the right conditions. I have raced this car at the track for the past 3 years. I have numerous videos on youtube.
You didn't know that...
Originally Posted by BrianBrave
MD SRT6's son laid down an 11.397 sec. - 128.6 MPH run back in January - with just a single NW intake, a 3" exhaust ...(and I'm assuming factory Manifolds)
You didn't know that...
You didn't know that...
not to get too off topic, but did MDSRT6 ever clarify that run was without spray? That mph seems too close to his spray runs to not be ... and why wouldn't he run it with spray after if it wasn't?
Originally Posted by billvp
not to get too off topic, but did MDSRT6 ever clarify that run was without spray? That mph seems too close to his spray runs to not be ... and why wouldn't he run it with spray after if it wasn't?
Congrats on the 55.Its always nice to get something different.I try to change up the garage every few years.At the same time it is sad to see all the srt6 guys who have been around here for awhile starting to move on.If ya do part out let me know.I would be interested in the NW manis


