I just received my sprint booster today but no printed directions. I remember seeing them on this site but can't remember what thread. I searched Sprint Booster Install but got no results. Does someone know what thread they are in?

Thanks.

 

Follow this thread. I found the removing of the two screws that hold the center console side to be a quick install.

https://www.crossfireforum.org/forum...656#post126656

 

I didn't remove mine. Just remove the nut cover, take nut off, remove washer, then pull the pedal assembly up and to you, unplug the only plug. Plug SB inline then put it back in place, starting with the top of the pedal. All the instructions say use a magnet to remove the washer, but mine couldn't come out with a magnet, so i had to use some super glue on the end of my socket, put it over the nut and onto the washer, then pull the socket back out.

https://www.crossfireforum.org/forum...sprint+booster

 

Thanks, I appreciate your help.

 

I think that I agree with FP on this one; the "upstate" method is much easier!

Two screws and a bit of contortion-ism and your done.

However once you have done it, you'll kick yourself in the butt for not doing it in 5-10 minutes max.

Just installed mine Sunday, and noticed a nice improvement. I still need to do a I-90 run to validate fully; never over 65 mph of course!

Goes nice with my SI ECU upgrade...

 

I love my SB so much. I just seems so much more peppy. Give it a little and it just rolls along. Best mod.

 

Got mine in today and it feels like a different car! well worth the price. The ebay seller got it to me from Hong Kong in 6 days. Would highly recommend him as a source.

 

Yea i got it from the same guy. He's the only one selling 451's on eBay. Took 8 days for me but still pretty good. Also recommend.