ok the motor is coming out...
Join Date: Jul 2007
Location: baltimore muuurland
Age: 41
Posts: 638
Likes: 0
Received 3 Likes
on
3 Posts
ok the motor is coming out...
heres the deal im going to be pulling my motor to paint the block and polish some bits and bobs as well as doing some upgrades, my tvt intake should be here within the next couple days and it requires me removing the intake and engine cover (that makes me happy i hate the big chunky black plastic) so i was trying to figure out what else i could do at the same time im ordering the evo sport underdrive pulleys and im sending my alternator to typhoon to have it rewound so itll kick out around 250 amps i was wondering if anyone found a viable not cheap but decent set of headers to clean things up in there or if anyone has figured out the fuel injector issue cause im going to have my true dual conversion done on my magnaflows soon plus the intake possible headers injectors and underdrive pulleys then im sending the ecu away for a retune with all the parts accounted for at the same time so that i might get an actual hp increase. my other question is has anyone found an msd or other company ignition system that will work or am i stuck with stock? maybe upgraded coils? of and i will need some red plug wires as well any direction would be a great help! thnxs guys!
Join Date: Jul 2007
Location: baltimore muuurland
Age: 41
Posts: 638
Likes: 0
Received 3 Likes
on
3 Posts
Re: ok the motor is coming out...
Irwin,
Check out these plug wires.
http://www.magnecor.com/magnecor1/main.htm
This could be your source for headers.
http://www.letmotorsports.com/chy.as...6&category=all
Don't forget, you have to have it all back together by the first weekend in April. Good luck.
Check out these plug wires.
http://www.magnecor.com/magnecor1/main.htm
This could be your source for headers.
http://www.letmotorsports.com/chy.as...6&category=all
Don't forget, you have to have it all back together by the first weekend in April. Good luck.
Join Date: Jul 2007
Location: baltimore muuurland
Age: 41
Posts: 638
Likes: 0
Received 3 Likes
on
3 Posts
Re: ok the motor is coming out...
hmmmm so 200 for the wires 950 for the headers... but no specs for the headers at all and are they ceramic coated or is that just paint??? but still i think they are the only ones available... thanks for the info and dont worry my dead line is 1 week before that lol. i just need to find out about the injectors now!
Thread
Thread Starter
Forum
Replies
Last Post
xfireohio
Cars For Sale - Archive
10
07-20-2020 12:03 AM
x1xsinisterx1x
Troubleshooting & Technical Questions & Modifications
4
08-24-2015 07:31 PM
mthtulsa
TSBs and How-To Articles
8
08-03-2015 06:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)