NeedsWings na and srt6 CAI group buy
na nevermind, i figured it out today going by the pics of the intake, i will just throw the nozzle in right after the mas and direct it toward the throttle body it should be fine as thats what i was gonna do to the stock setup. You said yours bolts right to the throttle body correct and that elbow is just rubber like the stock one right?, if so i should be fine just doing it this way, thanks for your help though on that. oh yeah and when do you think these intakes are gonna be shipped again?, hopefully asap it is holdin me up, lol.
Originally Posted by tylerxfire
na nevermind, i figured it out today going by the pics of the intake, i will just throw the nozzle in right after the mas and direct it toward the throttle body it should be fine as thats what i was gonna do to the stock setup. You said yours bolts right to the throttle body correct and that elbow is just rubber like the stock one right?, if so i should be fine just doing it this way, thanks for your help though on that. oh yeah and when do you think these intakes are gonna be shipped again?, hopefully asap it is holdin me up, lol.
couple things, first off for the n/a guys...
we purchased a box of the special 5 pt tamper proof torx bit you will need to make the oem disassebly easier, the snap on guy was the only place we could find to order these without buying complete sets. these ended up being ~ $14 each! DONT LOSE THEM! they will end up beign the most expensive bit in your toolbox
we purchased a box of the special 5 pt tamper proof torx bit you will need to make the oem disassebly easier, the snap on guy was the only place we could find to order these without buying complete sets. these ended up being ~ $14 each! DONT LOSE THEM! they will end up beign the most expensive bit in your toolbox
these are oem mann oil filter kits as a gift, they come in the big box like shown, since they do not have individual boxes we put them all in ziplock bags so dont be alarmed
Originally Posted by NeedsWings
these are oem mann oil filter kits as a gift, they come in the big box like shown, since they do not have individual boxes we put them all in ziplock bags so dont be alarmed
You are one He**'va Businessman & Innovator!
Thank you again & My Best to you,
Bill
Last edited by SilverFox; Apr 24, 2008 at 12:46 PM.
I don't know if all of you N/A guys have noticed, but in the SRT6 thread Needswings are/have had their car tuined by Inmotion to take into account the intake etc.
Check it out.
Now we need to push him to do the same with ours once he's finished on the SRT6!!! (there's more of us N/A, that must count for something!!!)
Check it out.
Now we need to push him to do the same with ours once he's finished on the SRT6!!! (there's more of us N/A, that must count for something!!!)
Gee thanks for the pics., Rob. Now it's just like a giant Christmas present under the tree that you can't open yet!
www.CustomCrossfire.com
Joined: Apr 2008
Posts: 804
Likes: 1
From: Tampa, FL
i just recieved mine from fedex not 5 minutes ago and ripped it out of the box! It was well worth waiting a few weeks to get.. Thanks NeedsWings!!!!
Originally Posted by HyprLtH20
i just recieved mine from fedex not 5 minutes ago and ripped it out of the box! It was well worth waiting a few weeks to get.. Thanks NeedsWings!!!!
Originally Posted by NeedsWings
powdercoating done, boxing now 
Now it's time to start saving for the next mod.



