Engine, Exhaust, Transmission and Differential Post questions here that have to do with the engine, cooling system, air intake, exhaust, Transmission and Differential

Show us your Engine bay

Thread Tools
 
Old Sep 30, 2020 | 05:41 PM
  #641 (permalink)  
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,351
Likes: 789
From: Central South Carolina
Default Re: Show us your Engine bay

.


Jared, try not to leave the W/W tank cover off for too long. The W/W fluid will dry out and leave a large amount of crusty deposits inside. I totally like the cover! Keep up the great work!


.
 
Reply
Old Sep 30, 2020 | 06:43 PM
  #642 (permalink)  
lotsofspareparts's Avatar
Forum Regular
Joined: Nov 2019
Posts: 411
Likes: 82
From: The Beautiful Pacific Northwest
Default Re: Show us your Engine bay

Originally Posted by dcskmail
That looks absolutely Great ! Did you do the insalll yourself ? What kind of horsepower
I did perform the swap myself, the thread is located here... https://www.crossfireforum.org/forum...t-v8-swap.html

Eurocharged claims (I think) 378hp and 402tq with the tune I am running.

Thanks, Jared
 
Reply
Old Nov 15, 2020 | 09:52 AM
  #643 (permalink)  
VintageBikesUSA's Avatar
Forum Regular
Joined: Jul 2020
Posts: 421
Likes: 16
From: Middle Tn
Default Re: Show us your Engine bay


SL55 DUAL CAI SEEMS TO FIT AND HOWLS LIKE A WOLF!
 
Reply
Old Nov 15, 2020 | 12:45 PM
  #644 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Show us your Engine bay

NICE !!!
Have you drained the oil catch can yet ?
( You need to get a pulley guard from Chris Messmer, his forum name is latemodel21 )
 

Last edited by ala_xfire; Nov 15, 2020 at 12:56 PM.
Reply
Old Nov 15, 2020 | 09:04 PM
  #645 (permalink)  
InfernoRedXfire's Avatar
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Default Re: Show us your Engine bay

I painted the letters myself
 
Reply
Old Nov 16, 2020 | 09:21 AM
  #646 (permalink)  
VintageBikesUSA's Avatar
Forum Regular
Joined: Jul 2020
Posts: 421
Likes: 16
From: Middle Tn
Default Re: Show us your Engine bay

George, I have not drained the catch can yet but due to my mother passing and the fact that my family went in to ROB her belongings I really have not been able to drive the car more than 5 miles I had to work to get the drivers side snorkel to work but it worked well once heated. I will contact the member today about the pully guard. . I am trying to stay busy so I dont do anything that I may regret. Thanks for the help. This forum has been helpful in so many ways . .
 
Reply
Old Nov 18, 2020 | 02:52 PM
  #647 (permalink)  
superfingers's Avatar
Joined: Oct 2019
Posts: 19
Likes: 0
From: Lincoln Pk, MI
Default Re: Show us your Engine bay

Ok, where do I get one of these Crossfire/Mercedes intake covers?
 
Reply
Old Nov 18, 2020 | 02:57 PM
  #648 (permalink)  
LGV-XFIRE's Avatar
Joined: Oct 2009
Posts: 135
Likes: 0
From: The Woodlands, Texas
Default Re: Show us your Engine bay

Ebay has them in multiple style (V6, Supercharged, etc.) The V6 is two part, so keep that in mind when purchasing.
 
Reply
Old Nov 18, 2020 | 04:33 PM
  #649 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,483
Likes: 852
From: Upstate SC
Default Re: Show us your Engine bay

Originally Posted by superfingers
Ok, where do I get one of these Crossfire/Mercedes intake covers?
Originally Posted by LGV-XFIRE
Ebay has them in multiple style (V6, Supercharged, etc.) The V6 is two part, so keep that in mind when purchasing.
Not sure which airbox you need or want. The picture below is my 2007 Coupe with the NA V6. This airbox is a 1-piece unit that was fitted to the 1999-2004 SLK series.. The amazing thing was I bought this from a M-B parts house "brand new" for approximately $85 delivered to my house, including the air filters. Airbox came from Germany. Now that was probably a couple of years back & these aren't available as NIB (New in Box) units anymore. But as stated by LGV-XFIRE, you can search eBay & find used ones in several configurations. My suggestion is to make sure you can see all the mounting clips on the bottom-side so the airbox will fit securely on your car.


 
Reply
Old Nov 21, 2020 | 09:51 AM
  #650 (permalink)  
Southernscrew's Avatar
Forum Regular
Joined: Feb 2012
Posts: 310
Likes: 6
From: Walton, Kentucky
Default Re: Show us your Engine bay


 
Reply
Old Nov 23, 2020 | 09:55 PM
  #651 (permalink)  
Romad's Avatar
Senior Member
Joined: Nov 2020
Posts: 840
Likes: 208
From: Tampa, FL.
Default Re: Show us your Engine bay

Just a clean plain Jane 2006 engine bay.


 
Reply
Old Nov 24, 2020 | 05:24 PM
  #652 (permalink)  
CROSSFIRERUSH's Avatar
Joined: Jul 2018
Posts: 260
Likes: 13
From: SE MICHIGAN
Default Re: Show us your Engine bay

Here's my WIP approach on my way to increasing the air flow intake on my NA. Picked this up from a salvage yard. It's now outfitted with K&N air filters (33-2181). Matte flat black paint & chrome paint and 'fleabay' for a Chrysler logo stick on badge. Already purchased a 74mm throttle body and plan on a Eurocharge tune in the spring. The plan is to dyno the car with the stock setup then do the throttle body, air cleaner swap and Eurocharge tune on the dyno. All I've read on this setup should get 20-25 HP. at the tire. We'll see. I'm not naive but this car is just a blast with the 6 speed. So 20-25 HP will increase the fun factor. 😎

This air cleaner badging is my approach to recognize Chrysler and Mercedes on these Crossfires.


 

Last edited by CROSSFIRERUSH; Nov 24, 2020 at 06:09 PM.
Reply
Old Nov 25, 2020 | 06:43 PM
  #653 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,483
Likes: 852
From: Upstate SC
Default Re: Show us your Engine bay

Originally Posted by Romad
Just a clean plain Jane 2006 engine bay.


These are the best versions. MHO
 
Reply
Old Nov 27, 2020 | 04:21 PM
  #654 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,483
Likes: 852
From: Upstate SC
Default Re: Show us your Engine bay

Anybody ever seen the Crossfire Airbox shown in the picture below? Found this while searching the internet earlier today. Sharp looking airbox!


 
Reply
Old Nov 27, 2020 | 06:03 PM
  #655 (permalink)  
dcskmail's Avatar
Senior Member
Joined: Nov 2017
Posts: 1,103
Likes: 243
From: Marine, il 62061
Default Re: Show us your Engine bay

Now that's one I would like to find. Let me know if anyone has a source on that engine cover
 
Reply
Old Nov 28, 2020 | 09:43 PM
  #656 (permalink)  
Reliableron's Avatar
Forum Regular
Joined: Nov 2007
Posts: 488
Likes: 9
From: Port Coquitlam, BC
Default Re: Show us your Engine bay

I think the only way you will get it is by buying a model car but it will be a lttle small! It was the original prototype I think and never made it to production in the real car.
 
Reply
Old Nov 28, 2020 | 10:14 PM
  #657 (permalink)  
Romad's Avatar
Senior Member
Joined: Nov 2020
Posts: 840
Likes: 208
From: Tampa, FL.
Default Re: Show us your Engine bay

Originally Posted by CROSSFIRERUSH
Here's my WIP approach on my way to increasing the air flow intake on my NA. Picked this up from a salvage yard. It's now outfitted with K&N air filters (33-2181). Matte flat black paint & chrome paint and 'fleabay' for a Chrysler logo stick on badge. Already purchased a 74mm throttle body and plan on a Eurocharge tune in the spring. The plan is to dyno the car with the stock setup then do the throttle body, air cleaner swap and Eurocharge tune on the dyno. All I've read on this setup should get 20-25 HP. at the tire. We'll see. I'm not naive but this car is just a blast with the 6 speed. So 20-25 HP will increase the fun factor. 😎
This air cleaner badging is my approach to recognize Chrysler and Mercedes on these Crossfires.
What year and model did that airbox come off of? Thanks
 
Reply
Old Nov 29, 2020 | 08:07 AM
  #658 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,483
Likes: 852
From: Upstate SC
Default Re: Show us your Engine bay

Originally Posted by Reliableron
I think the only way you will get it is by buying a model car but it will be a lttle small! It was the original prototype I think and never made it to production in the real car.
Probably a correct perspective. Should have been the Airbox design in the production car. But I'm thinking Chrysler thought it looked to akin to the M-B Airbox found on the SLK 320. So the Airbox evolved to the one that made the production Crossfire. And I'm somewhat sure the Airbox on our Crossfires was a lower cost to produce. They didn't even put the fully detailed Chrysler insignia on the Airbox.
 
Reply
Old Nov 29, 2020 | 08:15 AM
  #659 (permalink)  
dedwards0323's Avatar
Senior Member
Joined: Nov 2008
Posts: 8,483
Likes: 852
From: Upstate SC
Default Re: Show us your Engine bay

Originally Posted by Romad
What year and model did that airbox come off of? Thanks
That Airbox is the one that came on the Mercedes-Benz SLK 320, model years 2001-2004. I've got the same airbox on my Crossfire. Bought it new back in 2018 when you could still purchase it from M-B. Cost me all of $85.00 delivered from Germany!! Came with both air filters!!

 
Reply
Old Dec 24, 2020 | 06:39 AM
  #660 (permalink)  
mugsy99's Avatar
Joined: May 2012
Posts: 58
Likes: 0
From: Red Deer,Alberta Canada
Default Re: Show us your Engine bay


New Needswings DCAI
Just completed yesterday.
 
Reply



All times are GMT -4. The time now is 07:53 AM.