Has anyone got a Startech parts list? Im trying to track down which Crossfire model takes this exhaust system ZH-670-00. All help most appreciated!
Steve - UK

 

Not sure if this is what your looking for. ZH-670-00 is for the coupe and ZH-670-00C is for the roadster .http://www.startech.de/Preisliste_Pr...Lo_2008-08.pdf

 

I'm still trying to track one of these down but the loser from Brabus in Cali never answers his phone.

 

The tubing looks small to me.

 

Guys name is JOHN I tried to work with him as well if you remember back THEY PRETTY MUCH FELL OFF THE FACE OF THE EARTH. Brabus used to have tons of the products that don't sell as well on ebay now they have nothing literally no replies to emails or phone calls.

 

Guys, Many Thanks, your help is very much appreciated, and the pdf Robby - Well I've gone ahead and bought the exhaust of ebay in the UK, and Im gonna take the chance that it fits my coupe. It is brand new, still in its packaging and I paid £127.00 for it, which is a mega deal! So just pray for me that it fits!!
If not, the welding kit may be comming out to play!
I was supprised that there is a different part number for the roadster; I dont know of any difference?
Thanks again for the info' will report back at the weekend!

 

HATE TO BE THIS GUY RIGHT NOW but I am worried it is for the SRT6 that looks like the resonator set up that was under my car.... Although Startech never did anything for the SRT6

 

Yes I agree, it was the resonator that made me thinks the same - looking at the parts list (see earlier thread from Robby) I reckon this is the right pipe. I can only guess that Startech had these made to include the resonator (as per SRT) as this extra box acts as an expansion box and usually allows less baffling to be put in the rear muffler, hence a more sporty sound etc. However, if it turns out to be SRT, it will have a bigger bore pipe and I will have to cut the flange of and replace it with the old one to marry it up tothe front pipe - but, fingers crossed eh!
Thanks, Steve

 

Many thanks for this Robby

 

Many thanks for your efforts Mayaman - Ive bought it now, and we will soon see! I plan to try it at the weekend!

 

the srt has two pipes going into the res. does'nt it?

 

I dont know, but I hope you are right - as this would confirm that this one is OK.
This is the SRT system, so I reckon we will be OK

Thanks for this - Steve-uk

 

I wanted to buy it but the seller never got back to me about shipping to USA

 

Get a sound clip when you get it on!

 

Hope to have the system on the car in the next few days, will get a sound file uploaded asap,
Cheers
Steve

 

I Wanted It Soooooooo Bad!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

Just to update nyou - Startech exhaust system fitted today - went on to my car a treat with no hassles exept I had to fabricate the rear hangar hooks with some intricate metalwork as these are not built onto the Startech muffler box. Sound is not a great difference from standard; at low revs around town no difference at all, but a little more throaty when driving hard. EDIT: Have just been on good run and now have a nice sound at around 3000rpm upwards and 100mph sounds like ferrari ! After the winters gone I plan to cut open the muffler and remove some of the scrap metal in there - that will make it sing better. Not sure if its my imagination but seems like more power as well.
System is much much heavier than standard though which dissappointed me a little. Im pleased with this bargain deal but must say I could not justify paying for this mod if purchased at full retail price! If the system was made from aluminium now would be good.
Pics to follow!
Steve

 

I bought a factory borla exhaust and its fantastic, the sound is great.

 

The manual isn't quite the best for startech. They really made their tuning program for jeep cherokee and srt cars.