installed eurocharged 181 pulley, car won't start
installed eurocharged 181 pulley, car won't start
I have triple checked everything. Since eurocharged does not provide instructions a fellow memember sent me the let pulley instructions which helped a lot. But im sure there are some differences. Timing seems to be off. It cranks up hesitates, and dies down. what should i be looking for???? Thanks
Join Date: Jan 2008
Location: North Plains, OR
Age: 74
Posts: 5,180
Likes: 0
Received 6 Likes
on
5 Posts
Re: installed eurocharged 181 pulley, car wont start
That is odd... just swapping the crank pulley shouldn't cause your problem.... unless maybe the pulley is slipping on the crank???
1. did you get the new pulley seated all the way?
2. did you use a new bolt?
3. did you get the bolt tightened to spec?
That is all I can think of that could go wrong with the swap....(other than damaging the front seal)...
Keep us posted....
1. did you get the new pulley seated all the way?
2. did you use a new bolt?
3. did you get the bolt tightened to spec?
That is all I can think of that could go wrong with the swap....(other than damaging the front seal)...
Keep us posted....
Re: installed eurocharged 181 pulley, car wont start
Well now that u mention it. I used some pb blaster to get the crank bolt out so when i put in th new crank pulley some of it might have gotten on it. I just talked to jerry, he said i should check the flywheel since thats how i got the bolt off. Whats should i check for on the flywheel?
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by Holycrap
Well now that u mention it. I used some pb blaster to get the crank bolt out so when i put in th new crank pulley some of it might have gotten on it. I just talked to jerry, he said i should check the flywheel since thats how i got the bolt off. Whats should i check for on the flywheel?
Re: installed eurocharged 181 pulley, car wont start
Checked the fly wheel. It rotates when i try to crank it up. Checked all vacuums. It does not seem like the pulley is slipping. Any way to check if i installed the idler pulley wrong, or the crank? I didnt put it in the oven because it was a perfect fit. Should i have done that? Anything else??
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by Holycrap
Checked the fly wheel. It rotates when i try to crank it up. Checked all vacuums. It does not seem like the pulley is slipping. Any way to check if i installed the idler pulley wrong, or the crank? I didnt put it in the oven because it was a perfect fit. Should i have done that? Anything else??
see srt6 diagram here :https://www.crossfireforum.org/forum...y-diagram.html
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by SparkieSRT6
Did you check your belt routing?
see srt6 diagram here :https://www.crossfireforum.org/forum...y-diagram.html
see srt6 diagram here :https://www.crossfireforum.org/forum...y-diagram.html
Re: installed eurocharged 181 pulley, car wont start
This is just a shot in the dark, but could the battery be weak from leaving a door open or light on while you worked on it. Enough to crank it but not enough to sustain...as I've read really strange things can happen when the battery is weak.
I know its a long shot but worth considering????
I know its a long shot but worth considering????
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by SparkieSRT6
This is just a shot in the dark, but could the battery be weak from leaving a door open or light on while you worked on it. Enough to crank it but not enough to sustain...as I've read really strange things can happen when the battery is weak.
I know its a long shot but worth considering????
I know its a long shot but worth considering????
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by Holycrap
took ur advice and it did not help. i have reset the battery a few times also. its throwing a code. can anyone tell me how to get the codes from the dash. thanks
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by dinasrt
Well?? I'm curious what the problem turned out to be?
You must have missed the later posts. Here's where it gets messy ....................https://www.crossfireforum.org/forum...on-sensor.html
and then it get downright fugly
......https://www.crossfireforum.org/forum...-flywheel.html
Re: installed eurocharged 181 pulley, car wont start
Originally Posted by SparkieSRT6
You must have missed the later posts. Here's where it gets messy ....................https://www.crossfireforum.org/forum...on-sensor.html
and then it get downright fugly
......https://www.crossfireforum.org/forum...-flywheel.html
and then it get downright fugly
......https://www.crossfireforum.org/forum...-flywheel.html
Thread
Thread Starter
Forum
Replies
Last Post
roychez
Engine, Exhaust, Transmission and Differential
15
08-31-2022 01:11 AM
smmanley1996
Troubleshooting & Technical Questions & Modifications
9
09-04-2015 04:40 PM
Keepmeinmind13
Troubleshooting & Technical Questions & Modifications
14
07-10-2015 01:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)