Engine, Exhaust, Transmission and Differential Post questions here that have to do with the engine, cooling system, air intake, exhaust, Transmission and Differential

Newbie, need help !

Thread Tools
 
Old Oct 5, 2018 | 09:53 AM
  #1 (permalink)  
gt audio works's Avatar
Thread Starter
Joined: Oct 2018
Posts: 1
Likes: 0
From: NJ
Default Newbie, need help !

Hello all, I wish I had better circumstances to post, but my daughters 05' crossfire in dire need of some good advice.
Long story short, her both key fobs would not work, she tried the door key lock only to find it would not open.
To be honest we never tried the lock cyl. when she got the car, only used the fob.
She had to call a locksmith to break into her car, which he did and it set off the alarm.
Since she could not re set the alarm by the fob or the key the immobilizer would not let it start.
I tried to hard boot the ecu by disconnecting the battery but to no avail.
I dont know if these is a set number of times you can attempt to start it before the ecu shuts down, but now it refuses to start at all.
Before it would run for a second before the immobilizer shut it down, now it does nothing.
We had it towed to a dealer who gave her an estimate of $6,000 !!
Sounds like he is using the shotgun repair approach, fire as wide as possible to see if he can hit the problem.
He wants to order the following SKREEM module...2 key fobs...PCM...relay module...door lock
I am having the car towed home today, i will have time to mess with it...
Any ideas ??
Greg
 
Reply
Old Oct 5, 2018 | 12:33 PM
  #2 (permalink)  
CROSSFIRERUSH's Avatar
Joined: Jul 2018
Posts: 260
Likes: 13
From: SE MICHIGAN
Default Re: Newbie, need help !

I'm a newbie here myself...since July of this year. This is a great forum to help in diagnosing issues that come up with these cars. What you're describing could be 1 of 2 issues. The siren located under the modesty panel below the windshield and or the module in the trunk well.

Read through this link to better inform/zero in on a source of your problem.

https://www.crossfireforum.org/forum...shing-fix.html

Good luck and DO report back.

Regards,
 
Reply
Old Oct 5, 2018 | 01:29 PM
  #3 (permalink)  
ZERACER's Avatar
Senior Member
Joined: Nov 2006
Posts: 6,581
Likes: 762
From: Orange County CA.
Default Re: Newbie, need help !

Strange that both key FOBs would fail at the same time?
 
Reply
Old Oct 5, 2018 | 02:50 PM
  #4 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Newbie, need help !

Originally Posted by gt audio works
Hello all, I wish I had better circumstances to post, but my daughters 05' crossfire in dire need of some good advice.
Long story short, her both key fobs would not work, she tried the door key lock only to find it would not open.
To be honest we never tried the lock cyl. when she got the car, only used the fob.
She had to call a locksmith to break into her car, which he did and it set off the alarm.
Since she could not re set the alarm by the fob or the key the immobilizer would not let it start.
I tried to hard boot the ecu by disconnecting the battery but to no avail.
I dont know if these is a set number of times you can attempt to start it before the ecu shuts down, but now it refuses to start at all.
Before it would run for a second before the immobilizer shut it down, now it does nothing.
We had it towed to a dealer who gave her an estimate of $6,000 !!
Sounds like he is using the shotgun repair approach, fire as wide as possible to see if he can hit the problem.
He wants to order the following SKREEM module...2 key fobs...PCM...relay module...door lock
I am having the car towed home today, i will have time to mess with it...
Any ideas ??
Greg
How did the alarm stop?
Have you had much rain lately as it could be the security/air pump in the trunk has failed due to water in it.
Look in the passenger side well under the trunk carpet and see if any water is in it, use a piece of card and stick.
down beside the foam cover.
Both fobs should not fail at the same time, does the lock switch on the dash work? If the pump fails fob and dash switch will not work.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Oldemtn
New Member Introductions
6
Jan 15, 2016 06:20 PM
rivetts
General
9
Apr 30, 2012 06:49 PM
khlorineking
Crossfire Coupe
4
Aug 22, 2010 09:15 AM
NeverEnough
Crossfire SRT6
12
Aug 1, 2010 05:32 PM
BoilerUpXFire
Crossfire Coupe
3
Jan 22, 2009 02:20 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 09:20 AM.