Planning to replace the MB A2035400253 data plug connector in my 722.6 transmission and would like to know the parts needed in addition to the connector. I plan on removing only the bottom pan and need the part #'s and/ or required replacement items. I will be ordering the kit through FCP Euro.

 

FCP has a kit that should include a filter, fluid, and a gasket for the pan. You should purchase a dipstick to measure the fluid level so as you add the new fluid you can make sure it is the right amount. Some people purchase a new dipstick tube plug. Some people change the conductor plate, I did not do that I just changed the fluid, filter, and connector.

 

Thanks Nelson, I am doing what you did. My Roadster only has 40K miles. Installing the new connector, changing the filter, and cleaning the pan should be all that is needed.

 

This is a good post to read as you go through all the stuff needed to swap the connector. Might as well change the fluid depending on the years.

https://www.crossfireforum.org/forum...placement.html

 

Jack here is a post from FCP on how to do the trans and how to measure the fluid level.

https://www.fcpeuro.com/blog/mercede...-transmissions