Don't want holes in my bumper!
Don't want holes in my bumper!
I'm wondering if anyone has tried making a bracket to hold the front license plate, without drilling holes!
I'm going to explore using two metal brackets that will mount through the existing holes in the lower grill, perhaps with large washers and rubber bushings.
Anyone?
I'm going to explore using two metal brackets that will mount through the existing holes in the lower grill, perhaps with large washers and rubber bushings.
Anyone?
Re: Don't want holes in my bumper!
That's easy. Move to Arizona. We don't have front plates.
Seriously, however, your question has been discussed several times on this forum over the past three years. Do a search and see what you can find. I don't know if there is an easy solution, but I suspect there may be some creative suggestions on this board. Good luck.
Seriously, however, your question has been discussed several times on this forum over the past three years. Do a search and see what you can find. I don't know if there is an easy solution, but I suspect there may be some creative suggestions on this board. Good luck.
Last edited by maxxm; 07-30-2006 at 08:03 PM.
Re: Don't want holes in my bumper!
I have a vanity plate on my Mustang. It's held in place by heavy duty Velcro that I buy from Radio Shack. I've only been able to find it there.
Here's a link:
http://www.radioshack.com/product/in...entPage=search
I also use it on the gas filler cap door on my P/U. It's been on the Mustang for eight years and on the P/U for 20 years.
John
Here's a link:
http://www.radioshack.com/product/in...entPage=search
I also use it on the gas filler cap door on my P/U. It's been on the Mustang for eight years and on the P/U for 20 years.
John
Last edited by JCM298; 07-30-2006 at 10:52 PM.
Re: Don't want holes in my bumper!
Originally Posted by pepperink
I'm wondering if anyone has tried making a bracket to hold the front license plate, without drilling holes!
Anyone?
Anyone?
https://www.crossfireforum.org/forum...+plate+bracket
i personally run without one... no holes for me (but required in my state)... it just kills the clean look of the front end.
its worth the risk & ticket (but 10 years w/o one so far... knock knock).
Join Date: Aug 2004
Location: Long Island, NY
Age: 45
Posts: 1,744
Likes: 0
Received 2 Likes
on
2 Posts
Re: Don't want holes in my bumper!
I live in NY and we have front plates. I think its the stupidest law. When I bought my Crossfire, I also didn't want the dealership to deface the front bumper with a license plate bracket. I told them I would buy the car if they didn't install the bracket. To this day, I do not run a front plate. Have had no problems...the cops are too busy trying to figure out what kind of car it is and don't even notice the plate.
I have noticed a few Porsches and some new Solstices without front plates too...maybe NY will do away with another law that makes no sense...yeah, right...I'm not holding my breathe either.
I have noticed a few Porsches and some new Solstices without front plates too...maybe NY will do away with another law that makes no sense...yeah, right...I'm not holding my breathe either.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)