The top silver color bracket above the windshield needs repainting. Can anyone please tell me what the Chrysler paint number is ( or any brand spray paint that matches ) . I took the car into the local dealer this morning for service and the Service Manager said he didn't know. So, I need some help....again Thanks

 

martin: If you want to go the vinyl wrap route,,,this is what I used(Silver Carbon Fiber Vinyl wrap...cost around 20.00 for a piece 12x60")...easy to install and rather durable if you keep it covered with a UV protectant....Carl

 

I wouldn't mind finding this information out as well. I am having my entire car resprayed soon and I want to have my door handled repainted because they are chipping/flaking.

 

I would look up the code on a '07 or '08 Bright Silver Met Crossfire, I believe that color was almost a direct match to the windshield trim and door handles; I also heard that the Chrysler Silver PS2 was a match; Indium Silver (crossfire) 05179660AB is stated to also be close to a match.

I hope the above helps,

Dave

 

If the surround is a match to the wheels, then here's the wheel color...

XZA - Crossfire Satin Silver 05179660AB

From a previous thread about matching the surround color...

 

I believe that Chrysler PS2 is the same as the XZA, I'm not sure why the 2 codes but the SSB code has 2 different numbers also. No one has explained this satisfactorily to me yet.

 

According to the Factory Cross Ref from Mopar, the PS2 was never used as an exterior paint on the XF and was called Bright Silver Metallic Clear Coat. PS3 goes by the code name Sapphire Silver Metallic. There was also the P75 code name Bright Silver Metallic that became available on the 2007/2008 models only. Also, XZA and PS2 have entirely different Mopar and Sherwin-Williams paint P/Ns.

https://www.crossfireforum.org/forum...paintguide.pdf

 

That's odd. I thought I read that the door handles were originally powder coated, which shouldn't chip or flake.

 

Hmm. I honestly can't imagine them being powdercoated from the factory whereas all of the other silver accents are painted. I would speculate that the windshield trim, side strakes, grill slats and door handles are all painted using the same paint. My side strakes were chipping when I bought the car and I have since replaced those. But since I am having the entire resprayed soon I figured i'd just get my painted to do my door handles.

Edit: Just looked up the door handle on a factory Chrysler parts website. Here is the info that was given.

HANDLE. Right & Left. Exterior Door. .

This genuine part fits your 2005 CHRYSLER CROSSFIRE.
Color: (-Y3.)Exterior: (PY3.) Satin Silver.

 

Carl, I did order a sheet of Carbon Fiber and another member gave me the Chrysler paint number. I'll try your suggestion first ...many thanks martin jg in Florida

 

How did you cut and apply your carbon fiber vinyl? Did you do it all by hand? or, did you use a plotter/cutter? I have a Roland vinyl cutter and if you have accurate vector files to cut the front surround I would be interested...Peace

 

Martin. I did it all by hand...just be sure to leave enough to cover the edges and enough to fold on the back of the piece...it gives it a finished look...Carl

 

Mopar Paint Guide. PDF
This covers our cars.(ZH)

 

The door handles are plastic. So they definitely aren't powder coated.

 

I bought the same stuff awhile back. I still haven't put it on yet. I need to replace the windshield, and I'm broke. I painted all the other silver stuff with House of Kolor chrome paint. I did the windshield trim too, but it failed miserably there. I think the silver carbon fiber will look good with the decidedly non-chrome looking paint. It looks more like a near polished aluminum. And matches the finish on my aftermarket wheels as well.

I sure would like to see a better picture of that windshield.