Srt6 Base Plate - CrossfireForum - The Chrysler Crossfire and SRT6 Resource

Exterior & Lighting Any questions related to exterior, lighting and styling go in here.

Srt6 Base Plate

  #1 (permalink)  
Old 02-01-2018, 10:11 PM
Thread Starter
Join Date: Apr 2017
Location: Connecticut
Age: 31
Posts: 6
Default Srt6 Base Plate

I finally acquired an srt6 wing and base plate, actually the entire hatch so I still have some spare parts if anyone is looking
including the letters, emblem, latch hardware still available.

However, the previous owner of this hatch has repaired the leaky spoiler in a very painfull way. He seems to have epoxyied it all the way around. I managed to get the wing off unharmed, but the base plate is another story. Parts of it have fractured, mainly on the underside so repair will not have to be perfect, and one 3 way crack on the top beside the driver wing mounts. All of the studed areas are unharmed.

My question is if anyone has repaired the base plate and with what agent. Epoxy, resin, bondo, etc. Or is this a lost cause. If so I am in the market for a srt6 base plate which is even harder to find then the spoiler was.

Any help would be greatly appreciated. I can post pictures this weekend if it helps the cause.

  #2 (permalink)  
Old 02-02-2018, 11:18 AM
Join Date: Dec 2014
Location: Calgary, AB
Age: 54
Posts: 229
Default Re: Srt6 Base Plate

Iím currently repairing a wing for an SRT roadster

1/2 way throughthebmatetial used is on the FIXED WING REPAIR. it will be the same stuff
  #3 (permalink)  
Old 02-02-2018, 09:12 PM
Squirrel Crusher's Avatar
Senior Member
Join Date: Oct 2007
Location: Charlotte,NC
Posts: 1,507
Default Re: Srt6 Base Plate

Do you still have the rear window's brake light and mounting hardware? Squirrel Crusher
  #4 (permalink)  
Old 02-03-2018, 07:53 AM
Thread Starter
Join Date: Apr 2017
Location: Connecticut
Age: 31
Posts: 6
Default Re: Srt6 Base Plate

Sorry Squirrel Crusher, I do not have the brake light or hardware, already gone, pretty much only have the rubber bump stops for closing, latch, license plate light covers, crossfire lettering and emblem. Pretty sure that it but ill check when I get home in a few hours to see whats still attached.
  #5 (permalink)  
Old 02-07-2018, 07:59 PM
Join Date: Jan 2009
Posts: 71
Default Re: Srt6 Base Plate

SMC Repair or Problem Plastis Adhesive used with the fabric mesh is the best way to repair that base plate. V-groove out the cracks or if there is a crack that just ends drill a small hole into the end of it to keep it from spreading. It's a real easy repair. Finish with a two-part putty to fill any low spots, small scratches or pin holes.
Related Topics
Thread Starter
Last Post
Voodoo XFire
WTB - Items/Parts Wanted to Buy
04-10-2018 12:34 PM
Engine, Exhaust, Transmission and Differential
08-26-2010 11:05 AM
Crossfire Coupe
03-27-2010 09:16 PM
Crossfire SRT6
05-07-2008 06:34 PM
Crossfire SRT6
04-03-2008 06:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Quick Reply: Srt6 Base Plate

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.