can't get brake light bulb right...help!!
can't get brake light bulb right...help!!
i've checked through the search and couldn't find exactly what i have going on..bulb out indicator light came on...it was the driver side brake light.changed out bulb with another 7528 bulb..no matter what i try the brakes illuminate the running light filament;all lights worked fine before i replaced the brake bulb.contacts are clean,no contacts are touching and the bulb holder is getting power.do i not have bulb clocked right???
Last edited by loudrango; 07-26-2018 at 05:41 PM.
Re: can't get brake light bulb right...help!!
i've checked through the search and couldn't find exactly what i have going on..bulb out indicator light came on...it was the driver side brake light.changed out bulb with another 7528 bulb..no matter what i try the brakes illuminate the running light filament;all lights worked fine before i replaced the brake bulb.contacts are clean,no contacts are touching and the bulb holder is getting power.do i not have bulb clocked right???
Re: can't get brake light bulb right...help!!
yes i have.had the mrs. hit the brakes...it lights up the parking light filament;and when you hit the brakes with the parking lights on the bulb goes out until you let off the brake.i double checked to make sure nothing in the socket was touching each other.i went to the u pull it yard and got another socket.i unplugged the whole lamp housing and stuck the three wires from the used socket into the corresponding holes for the ground,brake,and parking light and works properly;so i'm guessing something is going on inside the socket i can't see.thanks everyone for the replies.
Thread
Thread Starter
Forum
Replies
Last Post
QUEBECOIS
Exterior & Lighting
3
05-11-2018 04:18 PM
MAYAman
Crossfire Coupe
42
06-24-2006 10:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)