Exterior Light Failure Alarm
Thread Starter
Joined: Aug 2015
Posts: 30
Likes: 0
From: Lindsay, Ontario
Exterior Light Failure Alarm
A week ago the alarm came on, on inspection the drivers side low beam was out. When I started to replace, the light came on as soon as I touch the wiring harness. Alarm went off all was good. Yesterday the Alarm came back. I have checked all exterior lights (including the two license plate ones). All are working fine. Any ideas ? Should I try replacing the original bulb that semi failed ?
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Re: Exterior Light Failure Alarm
A week ago the alarm came on, on inspection the drivers side low beam was out. When I started to replace, the light came on as soon as I touch the wiring harness. Alarm went off all was good. Yesterday the Alarm came back. I have checked all exterior lights (including the two license plate ones). All are working fine. Any ideas ? Should I try replacing the original bulb that semi failed ?
Thread Starter
Joined: Aug 2015
Posts: 30
Likes: 0
From: Lindsay, Ontario
Re: Exterior Light Failure Alarm
Some interesting stories. So I rechecked, when I start the car all is normal, no alarms. As soon as I engage the gears the fault light appears. All that should come on at that point is the day time running lights, and they are on. I'm going to replace the one that failed earlier, perhaps it has a flaky element. Any other thoughts would be appreciated.
Senior Member
Joined: Jun 2012
Posts: 2,875
Likes: 32
From: Key Largo FL . . . The fabulous Florida Keys
Re: Exterior Light Failure Alarm
Well . . . He is "one of yours" up there in the Great White North . . . 
Thread
Thread Starter
Forum
Replies
Last Post
shaverj
Troubleshooting & Technical Questions & Modifications
49
Jan 17, 2012 05:09 PM
Jonathan82
U.K.
3
Aug 24, 2010 08:37 PM
jrigsby
Crossfire Coupe
5
Nov 12, 2006 06:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
