If you must have one, here it is at a steep price.

http://www.ebay.com/itm/New-Crossfire-convertible-top-tool-M-B-A-1988990380-/321097416804?pt=Motors_Automotive_Tools&hash=item4ac2e5c064&vxp=mtr

 

I do need one. Wasn't a forum member making these for sale?

 

Not that I was aware of.
I did once see where Dave ( onehundred80 ) posted the dimensions so you could DIY.

 

Actually there was a member going to have some made up. I offered to email a cad file by noon the next day (was a Sunday) since he was "working on one" and that was the last of it.

If we had a laser instead of plasma...it would be a whole new world of accessories here...

 

Go here for the sizes.

 

Don't run right out and buy one until you have completed a good search. I found my hidden next to the jack. Had to remove the jack to see it.

 

That's right, look upon it as the Crossfire Easter egg hunt.

I had my NA from new and never could find the tool and got another from the dealer, he probably took it from the other Crossfire on the lot.

A year or so later I was looking in the pouch between the seats on the bulkhead and there it was. I then had two of them and gave one away at a GTG.

 

And another one up for grabs..

http://www.ebay.com/itm/CHRYSLER-CROSSFIRE-CONVERTBLE-TOOL-NEW-/290890979622?pt=Motors_Car_Truck_Parts_Accessories&hash=item43ba741926&vxp=mtr

 

I hate to ask, what does this tool fit?

 

According to the owners manual, it has 2 purposes :
1. to unlock and lock the tonneau cover latch during manual top up/down.
2. to remove the lower right side grille for access to the front tow hook.

A thin 10mm wrench will server for #1, a long screwdriver will server for #2.

Interesting thing is : they included this tool with the roadsters, but did NOT provide the 5mm hex wrench which is also necessary for the manual top up/down locking of the rear bow latch.