Interior Any questions or information related to interior go in here.

Creaking Door Panels - Solved

Thread Tools
 
Old Jul 26, 2008 | 08:48 PM
  #1 (permalink)  
Fired UP's Avatar
Thread Starter
Joined: Nov 2007
Posts: 150
Likes: 1
From: San Diego
Default Creaking Door Panels - Solved

Here is my solution to the dreaded creaking door panels.

Remove the bracket around the door latch, one screw (see pic).
Use single sided adhesive felt or the soft side of strips of Velcro.
(I used Velcro)

Use a thin pc of plastic (or be very carfull with a screw driver) to lift the door panel slightly and slip the Velcro under the panel----with the adhesive side on the metal door surface.

Under the latch bracket, make sure to place the Velcro all the way up to the corner of the panel under the bracket (you may notice the paint rubbed off at that contact point-noisy spot) I show this placement in one of the pics.

Place the other strips at other contact points (you can find them by pushing on the door panel).

You will see in the pics, the locations of my creaking points. Its probably the same for most of us.

Replace the latch bracket and there you have it,,,,, a quiet door panel.
You can even drive with your left leg bent up and leaning on the door now
(Auto stick---USA only, Right leg for the rest of you fine people ).
 
Attached Images
File Type: jpg
DSC04216.JPG (334.8 KB, 120 views)
File Type: jpg
DSC04233.JPG (356.4 KB, 124 views)
File Type: jpg
DSC04234.JPG (356.1 KB, 108 views)
File Type: jpg
DSC04194.JPG (325.2 KB, 118 views)
File Type: jpg
DSC04195.JPG (332.3 KB, 108 views)
File Type: jpg
DSC04196.JPG (345.0 KB, 115 views)

Last edited by Fired UP; Jul 28, 2008 at 09:36 AM.
Reply
Old Jul 27, 2008 | 04:12 PM
  #2 (permalink)  
Fired UP's Avatar
Thread Starter
Joined: Nov 2007
Posts: 150
Likes: 1
From: San Diego
Default Re: Creaking Door Panels- Solved

Bump.................
 
Reply
Old Jul 27, 2008 | 06:19 PM
  #3 (permalink)  
CALL911's Avatar
Forum Regular
Joined: Sep 2007
Posts: 672
Likes: 3
From: SEYMOUR TN
Default Re: Creaking Door Panels- Solved

I've also had great success with a very thin coating of vasaline in the right spots. Lasts a VERY long time.
 
Reply
Old Jul 27, 2008 | 06:21 PM
  #4 (permalink)  
CALL911's Avatar
Forum Regular
Joined: Sep 2007
Posts: 672
Likes: 3
From: SEYMOUR TN
Default Re: Creaking Door Panels- Solved

The right spots on the DOOR!!
 
Reply
Old Jul 28, 2008 | 07:11 AM
  #5 (permalink)  
Fired UP's Avatar
Thread Starter
Joined: Nov 2007
Posts: 150
Likes: 1
From: San Diego
Default Re: Creaking Door Panels - Solved

HHHGGGHHGGHGHHHH,,,, he said vasaline
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Osusannah
Crossfire Roadster
38
Feb 12, 2024 01:49 PM
Valk
Interior
25
Jul 12, 2021 09:49 PM
Sweet2002
Crossfire SRT6
5
Oct 1, 2015 01:42 AM
Billy22Bob
Crossfire SRT6
3
Sep 28, 2015 08:08 PM
Abaton6
All Crossfires
0
Sep 24, 2015 10:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:16 AM.