Vented Carbon Fiber Hood (Feeler)
Alright guys, Good News. We have completed the design. Now it works like this....
When ever the Feeler reach 25 participants, we will then move forward with the Bulk Buy. I've paid to be a forum sponsor and also paid the Group Buy Fees, nevertheless this feeler will help us in promoting the product to help offset the group buy cost in the near future. The supplier is pushing me to get the ball rolling, and I would hate for all this work to be lost.
The Price
25+ units @ $1,249.00
35+ units @ $1,099.00
"""""""""""""((((((((ONLY 1/3 Down TO START PRODUCTION))))))))"""""""""""""
I contacted the supplier and worked out a deal
1/3 deposit will be needed up front to start production once the Group Buy Opens! The remaining balance will need to be provided within 30 business days from the start of manufacturing. Manufacturing will take approximately a max of 40 business days. All hoods will be inspected & test fitted prior to shipment. Each unit will be insured at $1,499 a piece. All shipping claims must be reported at time of pick up or 24 hours after delivery.
I believe this is a really amazing price, not only because this is the 1st Hood produced for the crossfire, but quality time has been put into this effort since October of 2009 and the end result is amazing. Furthermore, even with the design enhancements of the prototype back in April, I believe all in all this is a great purchase. This product offers a different look that will set the crossfire apart from the other Chrysler Counterparts, while enhancing the vehicles appearance and shaving 30.2 lbs of weight out of the car. You can spend anywhere from a couple hundred to over thousand dollars on many of the small parts see on this forum. So, from a 1st hand perspective, I can honestly say this product deserves 5 Stars in relationship to best bang for buck.
#4 Step Process
Shipping
Shipping will be very reasonable depending on your location, International sales are welcomed. And even better if you and a friend or three get your hoods shipped to the same address you can save. Local pick up are also welcomed.
Please PM me if you have any questions. If your not a forum member and you’re a guest contact me at crosseffects@gmail.com
The bulk buy will officially end 30 days after receiving the 25th participant deposit.
1) Hoods will be guaranteed to fit.
2) Hood pins will not be needed; nevertheless it’s your choice
"All aftermarket body kits / hoods are sold AS-IS with no implied warranty. Buyer is responsible for fees concerning installation and up keep of the products. Buyer understands that some products are for off-road use. Check with local state laws before order. Buyer understands their preference to use after market products and due to strict State Laws each buyer will be responsible for any damages/possible injury incurred due to any condition. All units are manufactured with fiberglass and carbon fiber. We recommend that a professional body shop perform the installation. "
1) Direct replacement to factory hood
2) One-piece lightweight fiberglass construction grants stability without sacrificing strength
3) Unbroken carbon fiber weave layer and true rolled edges provides for superior beauty
4) Signature glossy UV-protection clear coats adds durability and longevity
5) Functional hood vents helps Increase heat dissipation from engine bay




More Pictures can be found at the link below. I will update the album with more pictures /Higher Quality this weekend with Zero shadows!!!.
Pictures by aahtxb - Photobucket
25-34 @ $1249
35+ @ $1099
(FEELER LIST) No Money Exchanged
1) rcompart *
2) Never_satisfied
3) PA/XFIRE
4) bowlman169
5) JimmySkullz
6) okeefe1961
7) GDrag
8) airborne82nddiv2003
9) Tnaski
10) texas t
11) ImportLabSRT
12) McHammer
13) Franc Rauscher
14) billvp
15) cmac
16) crossfirefrank
17) Violenteer
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
When ever the Feeler reach 25 participants, we will then move forward with the Bulk Buy. I've paid to be a forum sponsor and also paid the Group Buy Fees, nevertheless this feeler will help us in promoting the product to help offset the group buy cost in the near future. The supplier is pushing me to get the ball rolling, and I would hate for all this work to be lost.
The Price
25+ units @ $1,249.00
35+ units @ $1,099.00
"""""""""""""((((((((ONLY 1/3 Down TO START PRODUCTION))))))))"""""""""""""
I contacted the supplier and worked out a deal
1/3 deposit will be needed up front to start production once the Group Buy Opens! The remaining balance will need to be provided within 30 business days from the start of manufacturing. Manufacturing will take approximately a max of 40 business days. All hoods will be inspected & test fitted prior to shipment. Each unit will be insured at $1,499 a piece. All shipping claims must be reported at time of pick up or 24 hours after delivery.
I believe this is a really amazing price, not only because this is the 1st Hood produced for the crossfire, but quality time has been put into this effort since October of 2009 and the end result is amazing. Furthermore, even with the design enhancements of the prototype back in April, I believe all in all this is a great purchase. This product offers a different look that will set the crossfire apart from the other Chrysler Counterparts, while enhancing the vehicles appearance and shaving 30.2 lbs of weight out of the car. You can spend anywhere from a couple hundred to over thousand dollars on many of the small parts see on this forum. So, from a 1st hand perspective, I can honestly say this product deserves 5 Stars in relationship to best bang for buck.
#4 Step Process
- I will compose a solid list of everyone interested.
- Production will start once the Bulk Buy opens and 25 deposits are received
- Remaining balance must be received 30 Business days from the start of production
- Product will be available a Max of 40 days from the start of production.
Shipping
Shipping will be very reasonable depending on your location, International sales are welcomed. And even better if you and a friend or three get your hoods shipped to the same address you can save. Local pick up are also welcomed.
Please PM me if you have any questions. If your not a forum member and you’re a guest contact me at crosseffects@gmail.com
The bulk buy will officially end 30 days after receiving the 25th participant deposit.
1) Hoods will be guaranteed to fit.
2) Hood pins will not be needed; nevertheless it’s your choice
"All aftermarket body kits / hoods are sold AS-IS with no implied warranty. Buyer is responsible for fees concerning installation and up keep of the products. Buyer understands that some products are for off-road use. Check with local state laws before order. Buyer understands their preference to use after market products and due to strict State Laws each buyer will be responsible for any damages/possible injury incurred due to any condition. All units are manufactured with fiberglass and carbon fiber. We recommend that a professional body shop perform the installation. "
1) Direct replacement to factory hood
2) One-piece lightweight fiberglass construction grants stability without sacrificing strength
3) Unbroken carbon fiber weave layer and true rolled edges provides for superior beauty
4) Signature glossy UV-protection clear coats adds durability and longevity
5) Functional hood vents helps Increase heat dissipation from engine bay




More Pictures can be found at the link below. I will update the album with more pictures /Higher Quality this weekend with Zero shadows!!!.
Pictures by aahtxb - Photobucket
25-34 @ $1249
35+ @ $1099
(FEELER LIST) No Money Exchanged
1) rcompart *
2) Never_satisfied
3) PA/XFIRE
4) bowlman169
5) JimmySkullz
6) okeefe1961
7) GDrag
8) airborne82nddiv2003
9) Tnaski
10) texas t
11) ImportLabSRT
12) McHammer
13) Franc Rauscher
14) billvp
15) cmac
16) crossfirefrank
17) Violenteer
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Last edited by Mad_Med05X; Oct 1, 2010 at 02:34 PM.
Originally Posted by naudi90
I would LOVE to see this hood unpainted on a graphite SRT. Looks like it would match so well.
I'm in Philly right now for business, nevertheless, we could send a pm or ask STL SRT to post his thoughts of how the CF hood looked while it was on his car.....
Last edited by Mad_Med05X; Sep 30, 2010 at 08:15 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




