RENNTech pulley, Interior Suede, Graphite Mirror (parts)
Thread Starter
|
Senior Member
Joined: Jun 2006
Posts: 1,613
Likes: 1
From: Lakeville, MN/ River Falls, WI
RENNTech pulley, Interior Suede, Graphite Mirror (parts)
Hey guys, have a few things up for sale.
1. RENNtech pulley. Let me start by saying this pulley is used and was pulled off of my car due to potential for rubber dampener failure. A very reputable forum member recognized that I was going to more than likely run into larger problems down the road if it was not replaced. Looking at the pulley I am selling to see if anyone is interested in having the RENNtech ring re-fitted onto a stock Mercedes pulley like originally done from RENNtech. More than likely what this will involve is taking your original pulley to a machine shop, having it milled down to match what the RENNtech mercedes pulley. Followed by having the RENNtech ring refitted on to you your milled down mercedes pulley. The pictures detail how this would be possible, I just dont know if anyone is interested in doing it. This was how they made the pulley in 2001, the newer RENNtech pulleys are different potentially for this reason. LET ME BE CLEAR, I WOULD NOT RECOMMEND RUNNING THIS PULLEY AS IS. Would be a great project for someone with a stock crank pulley sitting on the shelf. Open to offers
2. I have an interior that I had wrapped in suede for sale. I had this job done last summer, I am not satisfied with the results. I ended up going back to the stock interior. There are a few minor imperfections as detailed in the pictures. I am about as **** as they come, these imperfections where too large for me to live with.
It would probably be best for someone who was interested in these parts to pick them up here in MN, if they wanted the headliner. For those of you who are looking for some good used parts to recover themselves you are more than welcome to take on the challenge. I pulled the suede off one of the parts (as you can see in the picture) I figured this would be fun for someone who wrapped there headliner in carbonfiber and wanted to take on the rest of the interior. Open to offers
3. I have a graphite mirror and motor that would be good for parts. The metal clip that holds it onto the car with a spring is broken you would have to want to use these parts to replace your scratched or damaged mirror, but use some of the parts from your original mirror.
4. Stock infinity speakers, open to offers. Worked fine when i pulled them from the car last weekend.
PM for any questions and or if you are interested in more pictures.
1. RENNtech pulley. Let me start by saying this pulley is used and was pulled off of my car due to potential for rubber dampener failure. A very reputable forum member recognized that I was going to more than likely run into larger problems down the road if it was not replaced. Looking at the pulley I am selling to see if anyone is interested in having the RENNtech ring re-fitted onto a stock Mercedes pulley like originally done from RENNtech. More than likely what this will involve is taking your original pulley to a machine shop, having it milled down to match what the RENNtech mercedes pulley. Followed by having the RENNtech ring refitted on to you your milled down mercedes pulley. The pictures detail how this would be possible, I just dont know if anyone is interested in doing it. This was how they made the pulley in 2001, the newer RENNtech pulleys are different potentially for this reason. LET ME BE CLEAR, I WOULD NOT RECOMMEND RUNNING THIS PULLEY AS IS. Would be a great project for someone with a stock crank pulley sitting on the shelf. Open to offers
2. I have an interior that I had wrapped in suede for sale. I had this job done last summer, I am not satisfied with the results. I ended up going back to the stock interior. There are a few minor imperfections as detailed in the pictures. I am about as **** as they come, these imperfections where too large for me to live with.
It would probably be best for someone who was interested in these parts to pick them up here in MN, if they wanted the headliner. For those of you who are looking for some good used parts to recover themselves you are more than welcome to take on the challenge. I pulled the suede off one of the parts (as you can see in the picture) I figured this would be fun for someone who wrapped there headliner in carbonfiber and wanted to take on the rest of the interior. Open to offers
3. I have a graphite mirror and motor that would be good for parts. The metal clip that holds it onto the car with a spring is broken you would have to want to use these parts to replace your scratched or damaged mirror, but use some of the parts from your original mirror.
4. Stock infinity speakers, open to offers. Worked fine when i pulled them from the car last weekend.
PM for any questions and or if you are interested in more pictures.
Last edited by jonnyangel04; Apr 27, 2012 at 02:40 AM.
Thread Starter
|
Senior Member
Joined: Jun 2006
Posts: 1,613
Likes: 1
From: Lakeville, MN/ River Falls, WI
Re: RENNTech pulley, Interior Suede, Graphite Mirror (parts)
More Pictures, no idea why they are getting uploaded upside down....
Last edited by jonnyangel04; Apr 25, 2012 at 12:46 AM.
Senior Member
Joined: Jul 2009
Posts: 6,349
Likes: 789
From: Central South Carolina
This whole site has been 'upside down' in the last few... 
Thread Starter
|
Senior Member
Joined: Jun 2006
Posts: 1,613
Likes: 1
From: Lakeville, MN/ River Falls, WI
Joined: Dec 2012
Posts: 40
Likes: 0
hatch panel black)
WTB black interior hatch panel with good fasteners pm me with price LINO C @ autumn3kt@gmail.com or call Tony at 6108447787
Thread
Thread Starter
Forum
Replies
Last Post
Kodebuster
Wheels, Brakes, Tires and Suspension
12
Nov 5, 2020 04:06 PM
tom2112
Parts/Accessories for sale - Archive
6
Oct 26, 2015 08:18 PM
amatxcrossfire
WTB - Items/Parts Wanted to Buy - Archive
5
Jul 30, 2015 08:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)