Parts/Accessories for sale - Archive This forum is no longer accepting new listings. Go to **the *new* Crossfire Marketplace**

2004 Crossfire Limited Part Out

 
Thread Tools
 
Search this Thread
 
Old Apr 14, 2018 | 07:52 AM
  #21 (permalink)  
NH_Crossfire's Avatar
Joined: Mar 2017
Posts: 30
Likes: 0
From: NH
Default Re: 2004 Crossfire Limited Part Out

How about the cigarette lighter assembly?
 
Old Apr 14, 2018 | 02:26 PM
  #22 (permalink)  
chevy_67_327's Avatar
Thread Starter
Joined: Apr 2018
Posts: 19
Likes: 1
From: Knoxville MD
Default Re: 2004 Crossfire Limited Part Out

Originally Posted by NH_Crossfire
How about the cigarette lighter assembly?
Yes I have that. has the coin drawer airbag light and cig lighter. looks perfect. if you are in the US $85 with shipping pretty sure this will fit in a medium fit ship box. if interested email me chevy_67_327@yahoo.com. you can mail a check or pay pal. let me know soon so I can take it off ebay.
 
Old Apr 21, 2018 | 04:18 PM
  #23 (permalink)  
Jim Holian's Avatar
Forum Regular
Joined: Nov 2017
Posts: 521
Likes: 19
From: Alexandria, Kentucky
Default Re: 2004 Crossfire Limited Part Out

chevy _67_327 - I'm looking for a right rear tail light lens in excellent condition. Can you help me out? My email is jpmlholian@aol.com. If you have one, can you let me know, and how much for it shipped to 41001 (Northern Kentucky).

Thanks,

Jim Holian
 
Old Apr 21, 2018 | 04:50 PM
  #24 (permalink)  
chevy_67_327's Avatar
Thread Starter
Joined: Apr 2018
Posts: 19
Likes: 1
From: Knoxville MD
Default Re: 2004 Crossfire Limited Part Out

Sorry the tail lights have sold
I only have the front yellow corner lights left.
 
Old Apr 26, 2018 | 10:05 PM
  #25 (permalink)  
Steve Jr's Avatar
Senior Member
Joined: Sep 2015
Posts: 1,465
Likes: 4
From: Knoxville
Default Re: 2004 Crossfire Limited Part Out

Thanks Rodger, my parts arrived and is everything I wanted...Your great..thanks again..
 
Old Apr 27, 2018 | 07:46 AM
  #26 (permalink)  
amx1397's Avatar
Senior Member
Joined: Apr 2008
Posts: 6,723
Likes: 463
From: Indialantic Fl./blairsville Ga
Default Re: 2004 Crossfire Limited Part Out

Thanks Rodger, my parts arrived, , if u need me give me a call jim
 
Old May 30, 2018 | 06:03 PM
  #27 (permalink)  
Mad Don's Avatar
Joined: Mar 2018
Posts: 2
Likes: 0
From: Missouri
Default Re: 2004 Crossfire Limited Part Out

I need a passenger side fog light
 
Old Aug 11, 2018 | 02:34 PM
  #28 (permalink)  
Falkao's Avatar
Joined: Aug 2018
Posts: 12
Likes: 0
From: Schaumburg, IL
Default Re: 2004 Crossfire Limited Part Out

Do you still have the wheels for sale?
 
Old Aug 12, 2018 | 10:01 AM
  #29 (permalink)  
MHPrior80's Avatar
Joined: Jul 2011
Posts: 42
Likes: 1
Default Re: 2004 Crossfire Limited Part Out

I know this thread is 4 months old but taking a shot at it, any of the cedar dash parts and console still available?
 
Old Aug 24, 2018 | 06:43 PM
  #30 (permalink)  
theodore.garland's Avatar
Joined: Jan 2017
Posts: 43
Likes: 2
From: Riverside California
Default Re: 2004 Crossfire Limited Part Out

Are you selling the steering wheel? Is it in good condition? I sent you an email about it.
 
Old Sep 3, 2018 | 02:39 AM
  #31 (permalink)  
Missmith's Avatar
Joined: May 2018
Posts: 11
Likes: 0
From: Georgia
Default Re: 2004 Crossfire Limited Part Out

Originally Posted by Valk
Note to buyers:
These are the panels that the Diffusers attach to but not the actual Diffusers
are the corner lenses the fog lights?
 
Old Sep 12, 2018 | 03:13 PM
  #32 (permalink)  
Ajbarbier's Avatar
Joined: May 2017
Posts: 143
Likes: 1
From: California
Default Re: 2004 Crossfire Limited Part Out

how much for the bulkhead cover and pieces of plastic that go over the seatbelt, specifically driver side. Thank you!
 
Old Sep 14, 2018 | 07:52 AM
  #33 (permalink)  
DHS's Avatar
DHS
Joined: Oct 2016
Posts: 252
Likes: 1
From: LaGrange. GA
Default Re: 2004 Crossfire Limited Part Out

since the center consul is out do you have the YAW sensor that is under it behind the shifter?

Dan
 
Old Oct 6, 2018 | 10:33 PM
  #34 (permalink)  
Jiggydogo's Avatar
Joined: Jun 2018
Posts: 14
Likes: 0
From: IN
Default Re: 2004 Crossfire Limited Part Out

Originally Posted by chevy_67_327
My son wrecked my 2004 crossfire a couple weeks ago in a spring snow storm so I am sadly parting. The front suspension and inner fender were pushed back 1/2 inch and I dont like to drive cars with pulled out frames.

My direct email is chevy_67_327@yahoo.com. I will bring these parts to the Spring Carlisle swap meet in PA on April 21.

It just hit 50K miles and was showroom perfect before the accident. It is grey with the burnt red/grey interior. Very pretty.
I have everything to sell except front bumper, drivers fender and headlight.

I have the engine/tranny pulled. I am LOOKING for a non crashed donor car that needs an engine. I will sell the engine if I cannot find a donor soon.

Engine. Complete pullout with all accessories and wiring harness. Ready to drop in. $800 Transmission. Ready to drop in. $250

The short list below are common crash parts or needed parts, most of which I have pulled and packaged already. There are many more parts i can pull for you.

Perfect windshield trim, all 3 pieces $200
hood with emblem, one small indent on front lip, perfect paint, $250
Rear bumper diffusers $25
Rear bumper cover complete. Nice paint but a few minor scratches, $150
Engine belly pan $50
Passenger rocker panel, cracked but usable $25
Drivers rocker panel, very nice $45
Passenger lower grill, $40
Passenger fender, perfect with emblem $220
Corner lenses $20 each
Tail Lights $80 each
Passenger headlamp $375
Drivers fender emblem
$35 Drivers Door, perfect, without interior panel, without airbag $200
Drivers Door interior panel, perfect, $175
Drivers Door airbag $75
Passenger Door, perfect, without interior panel, without airbag $200
Passenger Door interior panel, perfect, $175
Passenger Door airbag $75
Perfect leather seats $400
Passenger Airbag $100
Drivers wheel center with airbag $120
Radiator with AC condenser $100
Brake Booster with master cylinder $60
i


I will take the drivers side taillight. Thanks
 
Old Oct 23, 2018 | 12:02 PM
  #35 (permalink)  
Jim Holian's Avatar
Forum Regular
Joined: Nov 2017
Posts: 521
Likes: 19
From: Alexandria, Kentucky
Default Re: 2004 Crossfire Limited Part Out

I know this is a older post but thought I would ask anyway. Do you have the red plastic battery post cover that fits over the positive battery post? I lost mine and need one. It's red plastic with two plastic pins that hold it to the battery hold-down. If you have one from parting out your car, I would like to have one. Please let me know.

Thanks,

Jim Holian
jpmlholian@aol.com
 
Old Nov 3, 2018 | 12:06 PM
  #36 (permalink)  
mariontr's Avatar
Joined: Jun 2009
Posts: 199
Likes: 5
Default Re: 2004 Crossfire Limited Part Out

Can you let me know if you have the center bezel that goes around the automatic transmission? How about the rear speakers?
 
Old Nov 9, 2018 | 03:05 PM
  #37 (permalink)  
WaldrepD's Avatar
Joined: Jul 2018
Posts: 1
Likes: 0
From: AL
Default Re: 2004 Crossfire Limited Part Out

Where are you located?

I need the actual OEM wiring harness for the OEM Radio. Someone had installed an aftermarket radio in mine, and now I am putting an OEM Radio back in, but the plugs had been clipped. Unless I can find an aftermarket harness, I am hosed. Do you still have your wiring harness (for the radio with the pigtails attached)?
 
Old Nov 10, 2018 | 12:14 AM
  #38 (permalink)  
JSK's Avatar
JSK
Senior Member
Joined: Jul 2014
Posts: 1,199
Likes: 121
From: Mesa Arizona
Default Re: 2004 Crossfire Limited Part Out

Wire it direct. Just match colors. Even if you had a harness plug you would have to splice it in.
 

Last edited by JSK; Nov 10, 2018 at 12:16 AM.
Old Nov 10, 2018 | 12:07 PM
  #39 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: 2004 Crossfire Limited Part Out

Originally Posted by JSK
Wire it direct. Just match colors. Even if you had a harness plug you would have to splice it in.
I guess he could solder the wires to the stereo pins .. but using an OEM plug in the back of the stereo seems a lot easier to me..
 
Old Nov 10, 2018 | 12:39 PM
  #40 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 650
From: Ontario
Default Re: 2004 Crossfire Limited Part Out

Originally Posted by Mrmiata
I guess he could solder the wires to the stereo pins .. but using an OEM plug in the back of the stereo seems a lot easier to me..
I think that is what he means.
 



All times are GMT -4. The time now is 05:38 AM.