Parts/Accessories for sale - Archive This forum is no longer accepting new listings. Go to **the *new* Crossfire Marketplace**

2005 black SRT6 roadster / parting out . . .

 
Thread Tools
 
Search this Thread
 
  #41 (permalink)  
Old 08-27-2020, 10:00 PM
Join Date: Jul 2018
Location: SE MICHIGAN
Age: 82
Posts: 259
Received 13 Likes on 12 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

RED DOG,
.
You mentioned you had an additional 3rd brake light for a roadster.

If so, can you IM or email me at Jim.karam65@gmail.com on your price and condition.

Thanks Red Dog. Mine got destroyed by UPS sending it to Dave at Logan Diagnostics in Franklin, Tn for repair. 😒

Regards,

 
  #42 (permalink)  
Old 08-28-2020, 10:37 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 75
Posts: 2,876
Received 28 Likes on 25 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by CROSSFIRERUSH
RED DOG,
.
You mentioned you had an additional 3rd brake light for a roadster.

If so, can you IM or email me at Jim.karam65@gmail.com on your price and condition.

Thanks Red Dog. Mine got destroyed by UPS sending it to Dave at Logan Diagnostics in Franklin, Tn for repair. 😒

Regards,
Answered to his email . . . Sorry I no longer have any Crossfire roadster LED third brake lights. I probably could have sold 100+ if I had a source . . .
 
The following users liked this post:
CROSSFIRERUSH (08-28-2020)
  #43 (permalink)  
Old 08-28-2020, 12:37 PM
Valk's Avatar
Administrator / Senior Member
Join Date: Jul 2007
Location: Aurora , ILL
Posts: 17,154
Received 462 Likes on 324 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by CROSSFIRERUSH
RED DOG,
.You mentioned you had an additional 3rd brake light for a roadster.
Mine got destroyed by UPS sending it to Dave at Logan Diagnostics in Franklin, Tn for repair. 😒
I sent mine to Dave at Logan Diagnostics 2 weeks ago
Prior to sending it I spoke with Dave
He advised me to not use any kind of shipping tube as they often have damaged lights arrive in round tubes.
He instructed me to use a VERY HEAVY ply corrugated box about 6X6X36 to ensure that the LED light would not be damaged
I did exactly that and packed the light with plenty of padding around it and it arrived and was returned in perfect condition using the same box.
I'm sorry you had a bad experience with yours as these lights are nearly impossible to replace now
 
  #44 (permalink)  
Old 08-28-2020, 09:45 PM
Join Date: Jul 2018
Location: SE MICHIGAN
Age: 82
Posts: 259
Received 13 Likes on 12 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Valk,

Yeh, I was advised by Dave at Logan Diagnostics to package it real well and not ship it in a cardboard tube.

I actually bought the box at the UPS store.

Think UPS used the box 5” x 5” x 3’ as a bat. Clearly the box was stepped on. The light was broken clean in 3 places. I’ve started a claim with UPS.

Here’s pics on Tuesday still in the car and just before I shipped it that day.


As installed

Before it was boxed up.


Heres pics of the box and my light when received by Logan on Thursday:




 

Last edited by CROSSFIRERUSH; 08-28-2020 at 09:49 PM.
  #45 (permalink)  
Old 11-01-2020, 10:31 AM
Join Date: Aug 2013
Location: Galveston,Tx
Posts: 62
Likes: 0
Received 3 Likes on 1 Post
Default Re: 2005 black SRT6 roadster / parting out . . .

Do you have the tonneau cover lock with cylinder ? Thanks Don white-dc@msn,com
 
  #46 (permalink)  
Old 11-01-2020, 05:18 PM
GraphiteGhost's Avatar
Senior Member
Join Date: Jul 2009
Location: Central South Carolina
Age: 69
Posts: 5,850
Received 380 Likes on 329 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by CROSSFIRERUSH
Valk,

Yeh, I was advised by Dave at Logan Diagnostics to package it real well and not ship it in a cardboard tube.

I actually bought the box at the UPS store.

Think UPS used the box 5” x 5” x 3’ as a bat. Clearly the box was stepped on. The light was broken clean in 3 places. I’ve started a claim with UPS.

Here’s pics on Tuesday still in the car and just before I shipped it that day.

Heres pics of the box and my light when received by Logan on Thursday:


Damn, that looks HORRIBLE! Please say you bought the extra insurance (I think UPS only insures basic liability for $100.00, anything else costs more)… EVERY shipping company lately has GARBAGE for responsible service and NON-EXISTENT actual customer service (they ferret you off to each other on the phone, there are no actual ppl who address higher lever CSU issues..). SAD!


.
 
  #47 (permalink)  
Old 11-01-2020, 07:48 PM
Valk's Avatar
Administrator / Senior Member
Join Date: Jul 2007
Location: Aurora , ILL
Posts: 17,154
Received 462 Likes on 324 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Damn...I just saw this now
Were you able to find a replacement light since this happened ??


Originally Posted by CROSSFIRERUSH
Valk,

Yeh, I was advised by Dave at Logan Diagnostics to package it real well and not ship it in a cardboard tube.
I actually bought the box at the UPS store.
Think UPS used the box 5” x 5” x 3’ as a bat. Clearly the box was stepped on. The light was broken clean in 3 places. I’ve started a claim with UPS.
and my li
Here's pics of the box when received by Logan on Thursday:



 
  #48 (permalink)  
Old 11-01-2020, 07:58 PM
Join Date: Jul 2018
Location: SE MICHIGAN
Age: 82
Posts: 259
Received 13 Likes on 12 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Graphite Ghost,

I did insure it for $200.00 thinking I should be able to replace easily. Boy was I wrong. After searching for 2-3 weeks I found an NOS one out in Connecticut. Wouldn’t you know the NOS light was factory defective. So I shipped that one to Logan Diagnostics (insuring it with Lloyds of London (LOL). Dave at Logan had to do surgery on the pins at the plug. He does great work!

Shes in car and operates as factory. Nuthin’ money can’t fix!

Dowhite57,

I do have one but it needs a tiny spring to make it work.
 
  #49 (permalink)  
Old 11-01-2020, 08:05 PM
GraphiteGhost's Avatar
Senior Member
Join Date: Jul 2009
Location: Central South Carolina
Age: 69
Posts: 5,850
Received 380 Likes on 329 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by CROSSFIRERUSH
Graphite Ghost,

I did insure it for $200.00 thinking I should be able to replace easily. Boy was I wrong. After searching for 2-3 weeks I found an NOS one out in Connecticut. Wouldn’t you know the NOS light was factory defective. So I shipped that one to Logan Diagnostics (insuring it with Lloyds of London (LOL). Dave at Logan had to do surgery on the pins at the plug. He does great work!

Shes in car and operates as factory. Nuthin’ money can’t fix!

Dowhite57,

I do have one but it needs a tiny spring to make it work.


Glad you got one, you 'discretely(?)' left out the price? I bet it was AT LEAST twice the insured value... Glad your back in the 'red' (pun intended, ie red lamp and red negative valuation). The best part (pun intended) is that you got one (ie part, get it?)!


.
 
The following users liked this post:
CROSSFIRERUSH (11-02-2020)
  #50 (permalink)  
Old 11-01-2020, 08:55 PM
Valk's Avatar
Administrator / Senior Member
Join Date: Jul 2007
Location: Aurora , ILL
Posts: 17,154
Received 462 Likes on 324 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

I bought one for $125 from a guy in Maryland
When I got it it had a crack and a chip
I messaged him that I was disappointed that I hadn't known of this at the time of purchase
I think it happened when he removed it.
He asked me what he could do to rectify the situation and did offer to refund my money via PayPal if I returned it to him
I suggested he give me back $65 and I would keep it because the light does work fine
He agreed and in minutes he refunded me $65 to my PayPal account
These are very difficult to locate and I didn't want to return it since it is working
So I do have a spare for only the cost of $60
I did remove mine and sent it to Dave at Logan Diagnostics for repair and its back on my Roadster now working fine
Here is my working spare..I have since filled in the chip with clear epoxy






 
The following users liked this post:
CROSSFIRERUSH (11-02-2020)
  #51 (permalink)  
Old 11-02-2020, 01:18 PM
Join Date: Jul 2018
Location: SE MICHIGAN
Age: 82
Posts: 259
Received 13 Likes on 12 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

GraphiteGhost,

Looking back I kinda' feel lucky I found this NOS one. Seller did want $380. + shipping. Managed to get it for $300. shipped. In seller's defense, box was sealed when he bought it. I just insisted he open the box to verify it was intact. Didn't think to have him test it. Had it worked out of the box, I would have been $125.00 richer. That was my cost + shipping to Logan Diagnostics. Dave at Logan was great to work with. That's all they do.

Valk,

You did good. I'm finding its cheaper to buy the whole trunk lid , spoiler and light intact. Then sell off those parts to make you whole again.

 
  #52 (permalink)  
Old 11-02-2020, 04:58 PM
Join Date: Feb 2019
Location: FL
Age: 86
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

I am still looking for an original emergency top tool . Let me know if you have one. Email morvette2@yahoo.com
 
  #53 (permalink)  
Old 11-02-2020, 08:55 PM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 79
Posts: 12,783
Received 153 Likes on 141 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

https://www.ebay.com/itm/Original-Me...-/223743530193
 
  #54 (permalink)  
Old 11-18-2020, 09:57 AM
vinnys's Avatar
Forum Regular
Join Date: Jun 2012
Location: USA
Posts: 335
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Hi Bob, Do you have the RCM?
 
  #55 (permalink)  
Old 11-21-2020, 04:10 PM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 75
Posts: 2,876
Received 28 Likes on 25 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by vinnys
Hi Bob, Do you have the RCM?
Sorry for the delayed response . . . I have it but I'm not ready to disable the car yet.
Look on Ebay . . . https://www.ebay.com/sch/i.html?_fro...odule&_sacat=0
 
  #56 (permalink)  
Old 12-15-2020, 02:40 PM
Join Date: May 2009
Location: Thomas, Oklahoma
Age: 67
Posts: 196
Received 0 Likes on 0 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Do you still have cup holder?
 
  #57 (permalink)  
Old 04-10-2021, 09:24 PM
Join Date: Oct 2017
Location: New Jersey
Age: 56
Posts: 57
Received 1 Like on 1 Post
Default Re: 2005 black SRT6 roadster / parting out . . .

Do you still have the car and are you ready to disable it yet? If so I need the coolant expansion tank.

Thanks, Pat
 
  #58 (permalink)  
Old 04-11-2021, 04:20 AM
RED DOG's Avatar
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 75
Posts: 2,876
Received 28 Likes on 25 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Yes, I still have the parts car but I'm not yet ready to disable it. Sorry . . .

Still have the hood, the right front fender and both doors to sell. After that I intend to sell the remainder of the car (still movable / and actually still able to be driven) to someone who wants the complete drive train. That's the plan for it . . .

Mercedes SRT tank is #170 500 05 49, Chrysler #05135388AA.
Mercedes NA tank is #170 500 03 49,Chrysler #05101601AA.

Do a google search with that part number and you'll find new OEM tanks available from Mopar parts vendors. If you're looking for a replacement tank because the "nipple" has broken off, there is a "fix" for that on the forum . . . Look here: https://www.crossfireforum.org/forum...tml#post808154
 

Last edited by RED DOG; 04-11-2021 at 04:46 AM.
  #59 (permalink)  
Old 04-11-2021, 09:31 AM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Ontario
Age: 84
Posts: 25,372
Received 543 Likes on 459 Posts
Default Re: 2005 black SRT6 roadster / parting out . . .

Originally Posted by Valk
I bought one for $125 from a guy in Maryland
When I got it it had a crack and a chip
I messaged him that I was disappointed that I hadn't known of this at the time of purchase
I think it happened when he removed it.
He asked me what he could do to rectify the situation and did offer to refund my money via PayPal if I returned it to him
I suggested he give me back $65 and I would keep it because the light does work fine
He agreed and in minutes he refunded me $65 to my PayPal account
These are very difficult to locate and I didn't want to return it since it is working
So I do have a spare for only the cost of $60
I did remove mine and sent it to Dave at Logan Diagnostics for repair and its back on my Roadster now working fine
Here is my working spare..I have since filled in the chip with clear epoxy
Some people have no clue how to pack things for shipping. I sold my wife’s mother’s collection of Wedgwood figurines some twenty years ago when you could get decent money for them on eBay. Some sold for $500 each, I packed them and mailed them, of the twenty odd items I sold none were broken on arrival.
Shipped items have to be in sturdy boxes that can take a beating, the part must be wrapped in multiple layers of bubble wrap and tightly bound, The gaps between the bubble wrap and the box should be filled with styrofoam tightly packed so that when the box is shaken the item inside does not move. The thickness of the packing material depends on the strength of the shipped item.
I would ship a third stop light in a schedule 40 plastic plumbing pipe, with end caps securely taped on. The part packed securely with polystyrene at each end. The packing is going to weigh more in this case than the part but it will arrive undamaged.
Popcorn is pretty useless as unless it is jammed between the box and the wrapped item it will get shaken all over the place.
The handlers at the post office or whatever do not really care about your parcel, they arrive on a dump truck and are tipped onto the concrete floor like a load of bricks. They are not taken off individually.
Parcels with “Handle with care” labels are liable to be treated with less care, particularly in times of labour strife or if handled by a guy with a chip on his shoulder in which case your parcel could end up chipped.
The box shown in the previous post is a joke, rectangular boxes are weak, round and triangular boxes are stronger. Some shippers do not take round boxes as they roll around too much, if so put it in a square box.
Put the name and address of sender and receiver on the box and the wrapped item and if it is worth it insure or at least have tracking on the parcel.
It’s a jungle out there, only the well packed survive.
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
texas t
Crossfire SRT6
10
06-23-2023 05:30 PM
DTMenace
Parts/Accessories for sale - Archive
1
04-17-2019 07:39 PM
DTMenace
Cars For Sale - Archive
0
06-03-2011 01:05 PM
ChristineD
Crossfire Coupe
9
06-12-2010 01:48 PM
Bunniksider
Crossfire Roadster
5
07-24-2006 04:06 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 2005 black SRT6 roadster / parting out . . .



All times are GMT -4. The time now is 05:56 PM.