I'm curious as to which aftermarket 18s and 19s are the most light. There are a lot of benefits from choosing a light set. I know my Stern ST1s rears are 34lbs front 31lbs. But i'm on the look out for something different and lighter. I think it would be nice to see a picture or link and the weight. Thanks.

 

For autocross, I have:
18x7.5 Enkei RS7 for the front: 19.5 lbs
19x9 Konig Next for the rear: 23 lbs

 

Enkei RS7

Nice how does it look on your xfire?

 

Paul good to see you back, I have a set of Renntech Monolites in the garage that I might want to get rid of I debating keeping them because I am kinda tight on cash. Its lightest wheel you can get for mercedes I believe there 17 or 18lbs a rim two of the rims have tires. Also Im pretty picky so I was going to have them repainted and redone at about $750 for all 4 let me know if your interested.

 

pic attached

 

Does anyone know the wheights for the stock front and rear rims?

 

stock srt6 rim weights -
bathroom scale
rear rim no tire = 29 lbs
front rim no tire = 24 lbs
rear rim + tire = 54 lbs
front rim + tire = 45 lbs

 

Thanks! But do you know the wheights for the base crossfire?

 

they're very close if not the same

I think 23 front, 29 rear

 

My new wheels are here. I had to keep my 10mm spacers on both front and rear. Overall, its 4 or 5 lbs lighter than the stern st1 that I bought 11 years ago.

Niche Misano M117:

front 24lbs
Rear 26lbs
Sizes are included on the eBay screen shot.

 

Mine are
Esr Sr 08
18x8.5 - 23.6 lbs
19x10.5 - 28.8 lbs
On a scale when I got them.
A hair lighter than stock, and wider
I was debating on the targa but they are alot heavier.
Tsw has some nice rotary forged wheels, good price, size and bs.

 

You sure have patience, looks like it was nine years plus before you pulled the trigger again after doubting the ones you got way back then.
Where is the link to your site?

 

Hello its Paul's Crossfire & More I don't like the new templates in my website maker. My pages are small now, its freewebs.com. I got to keep the performance mods and parts pages. Anything new will be in that stupid template with 6 pictures limit. Lol

 

I did another thread somewhere of the Dupli-color vinyl wheel finish that I did. It bought me more time on the old wheels.

Oh also the wheels are on the car. It has a 16mm spacer at the front and 10 in the rear. I will post a pic after my next car wash.

 

I will wash it on Saturday.

Edit washed pic included:

 

Yes I thought those offsets sounded a bit high. Hope your spacers are hub centric. If not you may luck out and not vibrate.

 

Wait, it that the same red Xfire you had? (we met when you came to TMS)

 

I re-used the rears' that are HNR. Its driving well I haven't gone over 50 mph yet.

 

Yes its red. I did the 3m wrap in cf 3d. Dnoc. For the door seals and other visible red parts I did vinyl wrap in a bottle. Under the hood I had to use real paint. I chose high heat engine paint.

The car video after completing the wrap in 2016:

 

Done