do all xfires sit the same height,, what is yours
stock mine is measures at the center of the fender to the ground all 4 wheels.:
2005 srt,, stock Front 26 1/8 both front
2005 srt,, stock Rear 27 7/8 both rear.
2005 srt,, stock Front 26 1/8 both front
2005 srt,, stock Rear 27 7/8 both rear.
you should measure from the center of the wheel to get the best measurements...
if you go to the ground the tire pressure and level ground come into play more so.
if you go to the ground the tire pressure and level ground come into play more so.
Since the side wall of different tires can vary from brand to brand, (even though they share identical tire sizes) and I couldn't pin-point exactly where "dead" center of the wheel was, I chose a different location to measure.
Measuring from the bottom of the wheel (at the tire bead) to the edge of the wheel well, my car sits 25 1/8" in the rear, and 24 1/8" in front.
With 43000 miles on the car and a build date of Jan.04, the suspension has settled a bit.
Some forum members upon seeing it for the first time at different GTG's, have asked me if I lowered it.
Measuring from the bottom of the wheel (at the tire bead) to the edge of the wheel well, my car sits 25 1/8" in the rear, and 24 1/8" in front.
With 43000 miles on the car and a build date of Jan.04, the suspension has settled a bit.
Some forum members upon seeing it for the first time at different GTG's, have asked me if I lowered it.
Thread
Thread Starter
Forum
Replies
Last Post
franklindm
Troubleshooting & Technical Questions & Modifications
12
Mar 14, 2020 12:23 PM
steps
Troubleshooting & Technical Questions & Modifications
3
Sep 19, 2015 10:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



