Thinking of making License Plate Lens Replacements
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Originally Posted by alaxfire
So, have you shipped the 'first batch' out already ?
I was told from my freind at the machine shop they would have been done a lot sooner but it didnt go the way he planned so it delayed me. Sorry about this.
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Originally Posted by GraphiteGhost
Hey thanks for the LP lenses. You should really post some better lighted pictures and make sure everyone in the ebay listings understand the last pictures are of OEM ones in the auction. So, better pictures, tell em they have to use the original gaskets, and mark the OEM pictures. Otherwise, I think your heading for a couple of problems!
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Originally Posted by andrew
~ they appear to dispense a lot more light... nice touch!
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Originally Posted by onehundred80
$8 shipping to Canada, wait until Beaner sees this.
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Well i got everyone who ordered theres sent to them. I luckily had just enough for the people on here that bought. When they were machined I only had like 12 total usable sets out of what should of been 50 sets. When i cut them for using on the cnc i guess i got a little to close to measurements and i made some sides a little small buy less than .01. So i have like 30-40 sets witha rough edge. I lost a little bit of money on the first round and i have been extremely busy at work and have not had time to do anything with them right now. I do not think at this point in time will be making any more.
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 13
From: North Plains, OR
Re: Thinking of making License Plate Lens Replacements
I got mine and installed them and they are a perfect fit..... my old lens were very badly cracked....with the bright LED lights and new lens the cops can probably read my plates from a mile off now...
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
We had led's in our Crossfire and had trouble with them. I have ordered new ones that are suppose to be of better quality. The issue with ours was they were for like 3 months then all of the sudden i was following my wife one night and realized one was out and the other was flashing consistently. Hopefully the new ones are a little better.
Led's in
bradsmobile165.jpg
Led's in front, 8k hid heads and fogs
bradsmobile168.jpg
bradsmobile131.jpg
Led's in
bradsmobile165.jpg
Led's in front, 8k hid heads and fogs
bradsmobile168.jpg
bradsmobile131.jpg
Joined: May 2011
Posts: 161
Likes: 1
Re: Thinking of making License Plate Lens Replacements
Installed the lenses tonight with 6500k LED lights -- couldn't be happier with the appearance. Perfect fit, too.
Only issue was the rubber grommets came off on the old lenses... so I guess I'll have to use some RTV silicone to keep moisture out.
Only issue was the rubber grommets came off on the old lenses... so I guess I'll have to use some RTV silicone to keep moisture out.
Re: Thinking of making License Plate Lens Replacements
i would love a set ! clear as well please!
i actually own an LED/HID lighting company so i will be besting out putting all the lighting goodies on this car very soon! LED in all the right places , and maybe a nice 4300k HID set in the head lamps!
i actually own an LED/HID lighting company so i will be besting out putting all the lighting goodies on this car very soon! LED in all the right places , and maybe a nice 4300k HID set in the head lamps!
Last edited by falshami; Oct 6, 2012 at 03:28 AM.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: Thinking of making License Plate Lens Replacements
Also #60 & #67.
Thread Starter
Joined: Apr 2011
Posts: 102
Likes: 0
From: Olathe, KS
Re: Thinking of making License Plate Lens Replacements
Have a very limited quantity of these on eBay now. First come first serve. This will be my last run on these. Thanks!
eBay item# 121536229186
eBay item# 121536229186
Last edited by blwnstang02; Jan 4, 2015 at 04:57 PM.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Re: Thinking of making License Plate Lens Replacements
I had a set on for a year before I put the blinding multi-LED MB units in ( like your running lights ), no problems.
But, then, I seldom drive at night.
But, then, I seldom drive at night.
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Re: Thinking of making License Plate Lens Replacements