Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Possible to trap 95+ in the 1/8?

Thread Tools
 
Old Mar 18, 2013 | 03:41 PM
  #1 (permalink)  
SRTcraig's Avatar
Thread Starter
Joined: Aug 2012
Posts: 11
Likes: 0
Default Possible to trap 95+ in the 1/8?

I haved owned my SRT-6 for about 6 months now after previously owning 3 other SRT models. I have the 65mm pulley and tune from eurocharged as well as the IC isolation kit and intake. Right now I'm trapping 88-89 in the 1/8 on street tires, no DR. Is it possible to trap 95-100 in the 1/8 without swapping to a turbo or using nitrous? Any thoughts are appreciated, thanks.
 
Reply
Old Mar 18, 2013 | 03:53 PM
  #2 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,902
Likes: 15
From: TN
Default Re: Possible to trap 95+ in the 1/8?

I've trapped 93 in the 1/8th with a 7.55 ET, so I guess it's possible.
 
Reply
Old Mar 18, 2013 | 04:03 PM
  #3 (permalink)  
SRTcraig's Avatar
Thread Starter
Joined: Aug 2012
Posts: 11
Likes: 0
Default

What modifications do you have? How much power are you putting down?
 
Reply
Old Mar 18, 2013 | 04:08 PM
  #4 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Possible to trap 95+ in the 1/8?

You could try this mod :
 
Attached Images
File Type: jpg
Capture.JPG (98.5 KB, 9 views)
Reply
Old Mar 18, 2013 | 04:16 PM
  #5 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,902
Likes: 15
From: TN
Default Re: Possible to trap 95+ in the 1/8?

Originally Posted by SRTcraig
What modifications do you have? How much power are you putting down?

Click on the links in my signature and start reading.
 
Reply
Old Mar 18, 2013 | 04:17 PM
  #6 (permalink)  
SRTcraig's Avatar
Thread Starter
Joined: Aug 2012
Posts: 11
Likes: 0
Default

Originally Posted by alaxfire
You could try this mod :
I have seen that before. More time and money than i have.
 
Reply
Old Mar 18, 2013 | 08:58 PM
  #7 (permalink)  
TommyT's Avatar
Forum Regular
Joined: Sep 2011
Posts: 351
Likes: 0
From: Round Rock,TX
Default Re: Possible to trap 95+ in the 1/8?

the 100mph mark will need the dope.
 
Reply
Old Mar 18, 2013 | 09:19 PM
  #8 (permalink)  
SRTcraig's Avatar
Thread Starter
Joined: Aug 2012
Posts: 11
Likes: 0
Default Re: Possible to trap 95+ in the 1/8?

I guess what I'm asking is what will it take to trap 95? I believe my next modification will be zetronix kit and sometime later the ported manifolds or 178 pullry. Probably be out of fuel by that point. So some fuel upgrades. Would that be enough for 95?
 

Last edited by SRTcraig; Mar 18, 2013 at 09:26 PM.
Reply
Old Mar 18, 2013 | 09:36 PM
  #9 (permalink)  
TommyT's Avatar
Forum Regular
Joined: Sep 2011
Posts: 351
Likes: 0
From: Round Rock,TX
Default Re: Possible to trap 95+ in the 1/8?

dont think so bud....thats what just about everyone here runs and they arent trapping that high.
 
Reply
Old Mar 18, 2013 | 09:40 PM
  #10 (permalink)  
grip grip's Avatar
Senior Member
Joined: Mar 2011
Posts: 3,902
Likes: 15
From: TN
Default Re: Possible to trap 95+ in the 1/8?

Originally Posted by SRTcraig
I guess what I'm asking is what will it take to trap 95? I believe my next modification will be zetronix kit and sometime later the ported manifolds or 178 pullry. Probably be out of fuel by that point. So some fuel upgrades. Would that be enough for 95?
I have one of the fastest trap speeds in the 1/8 at 93.5 mph (excluding nitrous or V8 conversion), and it took everything including the kitchen sink to get there. Sorry, but you can bolt on every mod under the sun (excluding nitrous) and you'll be lucky to crack the 92mph mark in positive DA. Reality is, you won't see a 95mph trap in this car with the bolt-on's currently available unless you're willing to add nitrous or do an engine swap.

I'm not trying to brag - just trying to put things into perspective. Click on the link in my signature "myslips" for more examples of typical trap speeds versus ET's.

Good luck.
 

Last edited by grip grip; Mar 18, 2013 at 09:44 PM.
Reply
Old Mar 18, 2013 | 09:47 PM
  #11 (permalink)  
SRTcraig's Avatar
Thread Starter
Joined: Aug 2012
Posts: 11
Likes: 0
Default Re: Possible to trap 95+ in the 1/8?

Originally Posted by grip grip
I have one of the fastest trap speeds in the 1/8 at 93.5 mph (excluding nitrous or V8 conversion), and it took everything including the kitchen sink to get there. Sorry, but you can bolt on every mod under the sun (excluding nitrous) and you'll be lucky to crack the 92mph mark in positive DA. Reality is, you won't see a 95mph trap in this car with the bolt-on's currently available unless you're willing to add nitrous or do an engine swap.

I'm not trying to brag - just trying to put things into perspective. Click on the link in my signature "myslips" for more examples of typical trap speeds versus ET's.

Good luck.
Thanks. This is what I wanted to hear.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HOT FIYA
Crossfire SRT6
12
May 31, 2019 08:01 PM
waldig
All Crossfires
8
Sep 17, 2015 10:35 AM
velociabstract
Troubleshooting & Technical Questions & Modifications
15
Sep 7, 2015 03:43 PM
Ralph289
Crossfire SRT6
2
Aug 19, 2015 08:27 AM
grip grip
Other Cars Etc
6
Aug 1, 2015 09:18 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 10:20 AM.