Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Cold start taking too long - no codes

Thread Tools
 
  #21 (permalink)  
Old 05-06-2014, 06:01 PM
oledoc2u's Avatar
Senior Member
Join Date: Mar 2008
Location: IN
Age: 70
Posts: 14,576
Received 20 Likes on 18 Posts
Default Re: Cold start taking too long - no codes

At 11 yrs old, I would change them both. But I think that is your problem, one or the other, so cover the bases and replace both.... Lines should be fine unless you drive in a lot salt covered roads...
 
  #22 (permalink)  
Old 05-06-2014, 11:29 PM
Cedar11's Avatar
Thread Starter
Join Date: Jun 2010
Posts: 80
Likes: 0
Received 1 Like on 1 Post
Default Re: Cold start taking too long - no codes

Originally Posted by oledoc2u
At 11 yrs old, I would change them both. But I think that is your problem, one or the other, so cover the bases and replace both.... Lines should be fine unless you drive in a lot salt covered roads...
I have ordered both and will replace them at the same time. I do live in Michigan and have driven it during the winter so I will inspect the lines while I'm down there.
 
  #23 (permalink)  
Old 05-06-2014, 11:41 PM
Valk's Avatar
Administrator / Senior Member
Join Date: Jul 2007
Location: Aurora , ILL
Posts: 17,219
Received 515 Likes on 355 Posts
Default Re: Cold start taking too long - no codes

My car acted up like this a few years ago
I got my fuel pump and fuel filter from (
NeedsWings) Rob at Needswings.com ( a very reputable member of this forum by the way)
Quality parts made for our cars and the right parts every time

Had Rudy install both and never had the problem again
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gtjl
Troubleshooting & Technical Questions & Modifications
17
07-22-2015 06:28 PM
axnguyen
Cars For Sale - Archive
1
07-21-2015 11:41 AM
Rusty475
Cars For Sale - Archive
4
07-13-2015 10:03 AM
syfi
Troubleshooting & Technical Questions & Modifications
0
07-12-2015 05:59 PM
bdh
Crossfire SRT6
2
07-09-2015 09:40 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Cold start taking too long - no codes



All times are GMT -4. The time now is 10:40 PM.