This past Thursday my SRT-6 wouldn't turn over so I re-soldered the "RCM" as I've heard is a huge problem among these cars, it ran after I popped it back in, the 2 days later it wouldn't start up again....I checked the battery connections, and fuses. I really need some help to find out what's going on. If you or someone you guys know has had a problem similar to this Please message me, thanks.

 

Could be the engine relay contacts in the RCM.
tighed1 on this forum can replace that relay for you.
You have to send him an email, his IM box is full.
Search for it, I don't know the email address, I'd have to search.

 

Thanks a bunch man! I'll see if I can find his email! I'm glad there's still people responding on here.

 

!UPDATE! Turned out to be a bad relay in the RCM! Stuck a screwdriver on the relay opposite side of where I soldered and it started right up, so I took a pair of tweezers and bent the contact plate (closer) to the relay, now it's starts just fine by itself!

 

Make sure you didn't bend it TOO far, if that contact 'makes' when the key is off, you are going to have a dead battery soon.

And know that those relays are around $4 each - I have five in stock. And again, DJ can replace them for a small fee. (Or I could replace it for you, for a large fee...)

 

We made sure to not make contact with the relay. Do you take PayPal? I could send you my address just send me your contact info and we can get started on the transaction!