My headlights were out of alignment and I took them to a Chrysler dealership and they are now worse than before....both headlights seem to shoot way too far down.... i there an easier way to fix this myself?

 

Most common cause for this is the tab on the bulb is not seated into position.. you will also notice a white knobbed adjuster on the back.. don't "force" it once there is resistance to turning or you may pop it off the socket inside.

 

Tab shown at the bottom here (low beam)..

 

You can align the bulbs yourself if you have a flat area in front of a wal or garage door. Make sure the bulbs are located properly in the sockets of you are wasting your time. Unless someone has played around with before you only need to adjust the headlight itself and it sets both the high and low beams.
You could get BigDaddy who lives in your area to help you, either way it is better than the stealerships as you have found.