Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Key won't turn

Old Aug 4, 2017 | 05:50 AM
  #1 (permalink)  
ring175's Avatar
Thread Starter
Joined: May 2016
Posts: 6
Likes: 0
From: France
Lightbulb Key won't turn

Hi All,


A while ago - I had issues with Ignition key not turning, (I printed out the fix as shown on this forum- kept it with the car)... then all was good for a while.
But yesterday in S.W.France in a Intermarche car park - it happened again - but nothing was going to budge it.
I followed the fix to the letter, took me a couple of hours (drilling the pin is very awkward - as it spins with the drill)....All up and running. I would like to take the opportunity to thank everyone for sharing tips on this site...........I am a happy bunny
 
Reply
Old Aug 5, 2017 | 02:49 PM
  #2 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Key won't turn

Originally Posted by ring175
Hi All,


A while ago - I had issues with Ignition key not turning, (I printed out the fix as shown on this forum- kept it with the car)... then all was good for a while.
But yesterday in S.W.France in a Intermarche car park - it happened again - but nothing was going to budge it.
I followed the fix to the letter, took me a couple of hours (drilling the pin is very awkward - as it spins with the drill)....All up and running. I would like to take the opportunity to thank everyone for sharing tips on this site...........I am a happy bunny
Glad to see that you fixed your problem with no trouble except for he inconvenience.
The moral to be learned is to fix problems at the first opportunity and not wait.
 
Reply
Old Aug 5, 2017 | 04:18 PM
  #3 (permalink)  
pizzaguy's Avatar
Administrator
Joined: Jun 2009
Posts: 13,949
Likes: 1,276
From: Fort Worth, Texas
Default Re: Key won't turn

Yea, that is one fix you want to do BEFORE trouble.

I am quick to help people, but drilling that pin out? Good luck.................
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


All times are GMT -4. The time now is 06:36 PM.