OK, got the underpanel out, gages wired and will start with oil temp. I have one power wire for the two gauges, where is a good place to get switched power? Will run the sending unit wires (2) out to the engine through a port on the left side fuse box.
Found a bunch of broken tabs where the P.O. had put in some stereo, mine now has the stock one in, he must of kept the other, did a s**t job under the dash!
Thanks
Dan

 

Since you are going out through the fuse box anyway, you can find switched power on one of the post connections at the rear, you must remove both plastic fuse box covers to see them.

 

Perfect, two are switched!
Thanks
Dan