I have two 05 coupes, a SRT and NA, the SRT has yellow card in the fuse box cover with the info on each fuse. My NA does not have one, since it is the base model my guess is it is different than the SRT. Could some one with a base car make a photostat of theirs and send it so I can have one for the car?

Thanks
Dan

 

Just to be clear, is your 05 "base" an actual Base model or a Limited? Cause there are differences even between the Base and Limited.

 

This is a scan of the fuse box label on my SRT.
Note that some fuses are in brackets and they are not on the SRT, does one label cover all years or just the year 2005 fuse positions. Checking with the owners manuals should answer this question.
This actual scan could be modified to show any changes using Photo Shop or a similar program.

 

Not sure if the NA is base or limited, all black trim, stock wheels, cloth seats, six speed stick. I have the SRT one so need to see one out of a NA to see if they are different.

 

My thought would be , they are the same. Except for the seat relays.Trim an interior is where the differences are. Black trim suggests base. SE came out with different wheels than base or limited.

 

I realize that, my point was is my one was similar or the same as others because of the fuses that were in brackets.
Why put a SRT fuse in brackets when it actually came from an SRT, and fuses for an NA where also in brackets, get let? Convertibles may be different again.
Maybe from 2005 on all labels might have been the same if not PhotoShop could make it slightly different.
Sometime back a member with an SRT that was missing this label printed this photo for his car.

 

180 is correct , the only difference is slot 16 an 20 are swapped. 16 is wiper motor an 20 is spoiler motor, then 7 is the rearview mirror on mine. But you wont have to worry about that...

 

Seat relays are not on the base cars but oddly on this label they are not in brackets while the garage door opener is.

 

Well I was able to make a PDF file and then make two big copies and two smaller. Went to Kinkos and laminated all four, the big one for the glove box and the small ones to the fuse box, worked out nice!
Thanks
Dan