Performance Chip
I recently found a web site for Performance Chips USA that advertises their chip for the Crossfire. They are claiming up to 35 Hp, up to 40 lb ft of torque, and up to 9 MPH increases.
Has anyone purchased and used their chip, and, if so, what results did you obtain?
The Crossfire that I am thinking of adding this chip to would be a 2005 SRT6 Roadster.
Thank You in advance for any information you may offer.
Has anyone purchased and used their chip, and, if so, what results did you obtain?
The Crossfire that I am thinking of adding this chip to would be a 2005 SRT6 Roadster.
Thank You in advance for any information you may offer.
EDIT:
Deleted my post, as I found what you were talking about. That's for the N/A only and again, others have reported it is of no use.
Want more performance? Put in a nice, aftermarket CAI, bigger throttle body and even a smaller supercharger pulley, then get one of the tuners to tune it - and you WILL be impressed.
I understand the CAI is $500-800, the TB is $150 or so, and the pulley is $600-800. The tune Iv'e seen advertised runs $400.
I've driven three SRTs modded like this, and W O W are they a different car. As part of the tune, they also alter the transmissions' personality which adds a lot.
Deleted my post, as I found what you were talking about. That's for the N/A only and again, others have reported it is of no use.
Want more performance? Put in a nice, aftermarket CAI, bigger throttle body and even a smaller supercharger pulley, then get one of the tuners to tune it - and you WILL be impressed.
I understand the CAI is $500-800, the TB is $150 or so, and the pulley is $600-800. The tune Iv'e seen advertised runs $400.
I've driven three SRTs modded like this, and W O W are they a different car. As part of the tune, they also alter the transmissions' personality which adds a lot.
Last edited by pizzaguy; Apr 14, 2023 at 02:27 PM.
I recently found a web site for Performance Chips USA that advertises their chip for the Crossfire. They are claiming up to 35 Hp, up to 40 lb ft of torque, and up to 9 MPH increases.
Has anyone purchased and used their chip, and, if so, what results did you obtain?
The Crossfire that I am thinking of adding this chip to would be a 2005 SRT6 Roadster.
Thank You in advance for any information you may offer.
Has anyone purchased and used their chip, and, if so, what results did you obtain?
The Crossfire that I am thinking of adding this chip to would be a 2005 SRT6 Roadster.
Thank You in advance for any information you may offer.
Hi Pizza Guy,
I am planning to be at Eureka Springs. How much of the week I have not yet determined.
As I recall, you are in charge this year - is that correct?
If so, do you want another classroom and/or a tour from me?
If so, let me know soon so I can get started on either or both.
Kern
I am planning to be at Eureka Springs. How much of the week I have not yet determined.
As I recall, you are in charge this year - is that correct?
If so, do you want another classroom and/or a tour from me?
If so, let me know soon so I can get started on either or both.
Kern
Hi Pizza Guy,
I am planning to be at Eureka Springs. How much of the week I have not yet determined.
As I recall, you are in charge this year - is that correct?
If so, do you want another classroom and/or a tour from me?
If so, let me know soon so I can get started on either or both.
Kern
I am planning to be at Eureka Springs. How much of the week I have not yet determined.
As I recall, you are in charge this year - is that correct?
If so, do you want another classroom and/or a tour from me?
If so, let me know soon so I can get started on either or both.
Kern
I personally thought a class at Patti & Bob's on Tuesday evening after dinner would be a good idea.
I"ll get back to you!
Hi Mark,
Rather than having to post on the forum, you can reply to me via my personal email: KernFischer@gmail.com.
Looking forward to seeing the gang.
Kern
Rather than having to post on the forum, you can reply to me via my personal email: KernFischer@gmail.com.
Looking forward to seeing the gang.
Kern
Thread
Thread Starter
Forum
Replies
Last Post
AlvinByars
Engine, Exhaust, Transmission and Differential
24
Apr 3, 2005 10:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



