Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

oil level indicator quit working

Thread Tools
 
Old Sep 17, 2005 | 06:18 PM
  #1 (permalink)  
chocoholic_too's Avatar
Thread Starter
Joined: Jul 2004
Posts: 48
Likes: 0
From: Cincinnati, Ohio
Default oil level indicator quit working

In April, I was involved in an accident where some lady ran a stop sign and T-boned my drivers door. Long story short, it took them 75 DAYS to finally fix my cf. I had 3,400 miles on it and the FSS showed 3,600 left till next service. When I got it back, I didn't check the FSS for awhile and then I noticed it was counting down days ...18 to be exact. Then it went to minus, days even if I didn't drive it AND the oil level indicator wouldn't come on anymore. Just a blinking FSS. So I thought to myself, maybe the sensor got damaged in the crash. I reset the FSS today (tried resetting it to service schedule A but it stayed at B) but still no oil indicator. Should I go straight to the dealer or back to the body shop, since it should still be covered by insurance if it is broken?

Also would my warranty be invalid now after an accident?
 
Reply
Old Sep 18, 2005 | 11:57 AM
  #2 (permalink)  
kwiktsi's Avatar
Joined: Jun 2005
Posts: 63
Likes: 0
Default Re: oil level indicator quit working

If you find anything out, let me know- I have never been able to get the oil level indicator to come on. Not that it matters that much, I just check it the real way anyway- but it does bug me that it does not work lol.
Joe
 
Reply
Old Sep 18, 2005 | 12:50 PM
  #3 (permalink)  
ben47's Avatar
Forum Regular
Joined: Jun 2005
Posts: 928
Likes: 0
Default Re: oil level indicator quit working

Originally Posted by kwiktsi
If you find anything out, let me know- I have never been able to get the oil level indicator to come on. Joe
Sure it matters if it doesn't work. Everything on your car should work as advertised, after all you paid good money for it. Take it to your dealer if it doesn't work but try it again:

- Turn your key all the way to the right but do not start the engine.
- Wait 5 - 10 seconds and you will get and oil icon.
- Push the little stalk on the left just below the display.
- It will then show the status of your oil level.
 

Last edited by ben47; Sep 18, 2005 at 12:53 PM.
Reply
Old Sep 18, 2005 | 10:43 PM
  #4 (permalink)  
kwiktsi's Avatar
Joined: Jun 2005
Posts: 63
Likes: 0
Default Re: oil level indicator quit working

Works- thanks. If I remember right, the manual said to turn key on and push the button to get the display to appear. I have to push the button twice though to get the level to show.
Joe
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IGot2P
Crossfire Coupe
53
Jul 26, 2025 12:40 PM
wootto
U.K.
7
Aug 16, 2020 07:55 PM
4drturbo
Crossfire SRT6
41
Jan 3, 2019 02:46 PM
xzmilan
Crossfire Coupe
17
Jul 22, 2015 10:40 AM
skeet370
Troubleshooting & Technical Questions & Modifications
5
Jul 18, 2015 01:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 06:35 AM.