Below is a listing of Crossfire Forum Owners that have the tooling, software &/or capability to perform a TPMS Relearn Procedure to restore full functionality of the system & clear the dash warning light. Post in this thread if you have the capability & are willing to help others with the TPMS system.

1) dedwards0323 / Upstate SC
2) jamie04 / Virginia

 

GOod idea. Thread is a sticky now.

 

FYI. I have successfully replaced the TPMS sensors (with Schrader p/n 20028) in my stock wheels and performed the re-learn procedure on my 2005 SRT6 successfully, using an old laptop computer and the DRBIII emulator software and Micropod interface module described in another thread. (I was only able to do this thanks to the brave souls who blazed that trail before me and posted about it here.) I recently purchased an Ateq VT37 TPMS scan tool so that I can also clone new sensors to match existing (working) sensors. Using this, I have been able to clone programmable sensors (Schrader 33700) for a spare set of Crossfire wheels to match the other new sensors already mentioned. Those wheels now work with the car's TPMS also. If you want to drive to southern Virginia, I'll be glad to help with getting your car to learn your newly installed sensors. Since we don't carry spare tires in these cars, it is comforting to have the TPMS working again. Just contact me. -Jamie04