Finally Lowered my Car
Originally Posted by Voyager
check out that awesome squirt gun!
I notice no difference in the ride, but handles better cornering. I had it done by a MB mechanic for $150, side job.
Last edited by FP; Sep 28, 2008 at 06:40 PM.
Oh yeah! That's the ticket FP. Looks real good! I used 12mm spacers on the rear stock wheels and they were perfect!
And that PINK Lawn Chair hasn't moved all year.
And that PINK Lawn Chair hasn't moved all year.
Originally Posted by Fritzauf
Oh yeah! That's the ticket FP. Looks real good! I used 12mm spacers on the rear stock wheels and they were perfect!
And that PINK Lawn Chair hasn't moved all year.
And that PINK Lawn Chair hasn't moved all year.
I've just ordered 12mm spacers for the rear, and 10mm for the front. I hope I get them by Friday so I can install them Saturday.
Originally Posted by FP
I've just ordered 12mm spacers for the rear, and 10mm for the front.
Originally Posted by FP
I notice no difference in the ride, but handles better cornering. I had it done by a MB mechanic for $150, side job.
That baby looks a lot better lowered FP and spacers will make it even better.
eatmySRTdust, the SRT 6 lowers well in the front, but for some reason the rear does not want to drop like a regular xfire. I don't know for sure why, but I think it's the stiffer sway bar or the bump stops in the top of the shocks. I just went with a taller tire after my rear didn't lower as much as the front to get the distance between the tire's & the bottom of the fenders about the same.
Originally Posted by eatmySRT6dust
I really want to lower my SRT6. How much did the whole set up cost you? Did you only need to buy the springs? And where did you order the spacers from? Thank you.
Originally Posted by v8valiant
ok why does everyone put spacers on their cars? does it really change the look that much? any pics before and after?
without spacers:
xfirerear1.jpg
with spacers:
IMG_08311.jpg
looks much better pushing the rim & tire closer to the wheel well edge imo ... hope this helps!
xfirerear1.jpg
with spacers:
IMG_08311.jpg
looks much better pushing the rim & tire closer to the wheel well edge imo ... hope this helps!






