I know I could spend the day with search and put my answer together.. but thought I'd throw this out and see if I can get a faster response..

Would these fit okay without spacers and clearance issues?

Front
• Size: 19x8, 32mm Offset
Rear
• Size: 19x9.5, 32mm Offset

 

I bookmarked this for myself... But it appears the answer is yes
https://www.crossfireforum.org/forum...hat-works.html

 

Thanks for the link! Might have to look into 20's for the rear to help keep the "factory look"..

 

fit = yes
look wrong in the rear = yes
your decision =yes

 

Fronts will fit fine; rears will also fit, but will sit deeper inside the fender by 8-10mm each side (vs factory).

Not necessarily a deal breaker, but if you're running 19's up front, I'd try to find a suitable 20" wheel in the rear with approximately +25mm offset.

 

Is my math not working right.. ? The extra offset puts it about 3/8 more under the car.. the extra width over stock puts it 1/8 closer to wheel fender.. right?

Me and metric ain't best buds.. LOL

So look wrong? Or do you mean from being a 19 all the way around..

 

Just doing a "fast look" when I go to 20" I'm pulling up 8 1/2" width.. not going to happen there.. This find wheels for your wife is a whole bunch of fun.. LOL.

 

That's what I came up with too. Although that doesn't necessarily make it right either
I think Rob at Needswings had access to some staggered 18/19s too if you aren't set on 19s in the front. A couple of styles of AMG replicas if memory serves.

 

closer to stock works for me.. these are what she has decided on.. for the most part.. LOL

 

Me like.
If you get them and the missus don't like them, give them to me.

 

We'll have to see how they look on an Alabaster Coupe first..

And thanks for the fix on the thread title Mr. Moderator..

 

Nice little online tool here..

Custom rims, wheel tire packages for your ride - RIMSnTIRES.com

 

Greg: I really like the looks of those Rims...are they very expensive...what type are you/Sherri considering, the gloss black or the machine faced...Carl

 

They should come in under a grand for the set. And she likes the ones just like in the video.

 

www.willtheyfit.com

You're welcome

 

What tires sizes are you running?
Stock or wider rears?
I ask cause on my research since you are thinking about stepping up to a 19/20 there are ALOT more wheel options with 10-10.5 rears.
And more options on rotoformed wheels.
A 19x10.5 5x112 will cost $768 apiece unless rear hubs are "fill in drill" to a 114.3 then just a 73 to 66 hub spacer (which you will probably need anyway)

 

Currently just the stock set up. These that she likes start at 19".. so..These are what I've found (haven't researched best price yet). Unless a 20 x 10 40mm for the rear will fit.. No spacers just center bore adapters.

Lorenzo WL27

Front • Size: 19x8, 32mm Offset - Front: 255/30ZR19
• Price: $228 (each)
• Est. Availability: In Stock
• Weight: 32.2lbs.

Rear • Size: 19x9.5, 32mm Offset - Rear: 255/35ZR19
• Price: $232 (each)
• Est. Availability: Fewer than 3, Special Order Available
• Weight: 32.7lbs.

 

Thank you for the contribution.. looks like my find above yours gives a little more in detail. Both say need at least and inch from the suspension over stock..

 

There website says 19X8 / 20x8.5
255/30 19th on front isn'the that to wide?
You like black&chrome with lip best?
Or concave, flat?
Silver, gunmetal etc.?
Does weight of wheel matter to you?the metal bore adapters r cheap on ebay

http://www.lorenzowheels.com/wheels/WL27/WL0273?year=2004&make=Chrysler&model=Crossfire

 

That was just the size tire one website listed for it.. She likes the black / chrome with the "rivet" design on the edge.. and several spoke design.. but she wants "flair" with it.. not just plain spoked.. now I know why they take so long to shop.. LOL. Found this .. it's where I'm pulling my available sizes from. Not real concerned on wheel weight.

Lorenzo WL27 Glossy Black w/ Machined Face Wheels & Rims | Belle Tire