Anyone know if I can use 18 x 8.5 and 19 x 9.5 wheels with my stock tires. Also What offset should I be looking for? I know about the center bore.
Thanks.

 

someone here may know but if not... i would check with the guys at the tire rack... they will answer any wheel fitment questions one may have. they are very helpful.

 

Just checked with the wheel company. The offset on both is + 35.

Anyone know what size spacers I would need?

 

Looks like alot of people asking me about how I fit my brabus, lorinser, and my mille miglia wheels.
So let me answer it on the forum so everybody could benefit from it.

You need the front offset in ET30-35mm range
Depending on the width of the wheels, you need about ET15-25mm offset.

and the MOST important thing, make sure the wheel support TPMS. I have to do custom work with drill/dremel/etc. to create the groove so that you could install TPMS:



In any case, you might wonder how those wheels look on my car?

Lorinser LM6 19x8.5" and 19x9.5":


Brabus Monoblock V multipiece 19x8.5 and 19x9.5:


MilleMiglie F20 19x8.5 and 20x9.5: