Need cable sent to Oregon hope to pay with Paypal. Thanks.

 

You may need to have one made by a bike shop.

 

EDIT 08-26-20 - Neither of the links I provided below have the Tonneau Flap Cable. It is a discontinued part and seems to be "no longer available" anywhere that I can find.

The genuine Crossfire roadster tonneau flap cable is available new. Not cheap but it is available . . .

This is the part number: 05140962AA

Look here:
https://www.chryslerpartsoverstock.c...5140962AA.html

https://www.concord-parts.com/item/05140962aa/chrysler

 

Thank you. Ordered.

 

Overstock said they really don't have it in stock. When I order from Concord I get a blank screen. Will try again on Monday. Any other ideas?

 

If you are not able to get one through Concord, please email me at RedDogNumber1@aol.com and I will be able to help.

Bob Davis
Red Dog

 

Thanks

 

Well it looks like Concord Parts is defunct. Sorry for the wild goose chase . . .

 

I have a 2005 roadster. The flap on the passenger side will not fold under so I can lower the top. I checked for a problem and discovered that the pin that holds the wheel pivot assembly came undone. The cable appears to be good. I slid the pin back in place and everything looks good. When I try to lower the top and the flap does not fold under as it should. The spring has no tension in it to wind up the cable. Help. When the pin slipped out did the pivot wheel unwind one turn? When the top is up there is full tension on the pivot wheel, when the top is down the cable actually loops out of the assembly where the slack is from the pivot wheel. Could the cable be broken somewhere in the travel from the flap to the bracket that moves the bow top.?