CrossfireForum - The Chrysler Crossfire and SRT6 Resource
0 2016/09/22 17:13:59
0 2016/09/22 17:13:58
Here are the rotors of the SC after I washed them in paint thinner - not lacquer thinner. Rotated rotors to wash themselves
Here are the rotors of the SC after I washed them in paint thinner - not lacquer thinner. Rotated rotors to wash themselves
0 2016/09/22 17:13:57
Outlet of the SC and the IC inlet ports exposed
Outlet of the SC and the IC inlet ports exposed
0 2016/09/22 17:13:10
TB mount after sanding and polishing cause I could
TB mount after sanding and polishing cause I could
0 2016/09/22 17:13:09
Cleaned with lacquer thinner and sanded passages to smooth flow.
Cleaned with lacquer thinner and sanded passages to smooth flow.
0 2016/09/22 17:13:08
Matched and polished the matching ports of SC
Matched and polished the matching ports of SC
0 2016/09/22 17:13:06
I gasket matched and polished the inlet ports to the HEADS
I gasket matched and polished the inlet ports to the HEADS
0 2016/09/22 17:13:05
Housing inlet showing fittings and ports
Housing inlet showing fittings and ports
0 2016/09/22 17:13:03
SC side of the inlet housing AFTER CLEANING, was black with crud etc.
SC side of the inlet housing AFTER CLEANING, was black with crud etc.
0 2016/09/22 17:13:02
I had polished the input to clear out some restriction - more air flow?
I had polished the input to clear out some restriction - more air flow?
0 2016/09/22 17:11:49
New IC next to the original unit, showing the size and layout
New IC next to the original unit, showing the size and layout
0 2016/09/22 17:11:47
Here is the liner just before I slipped it back into the C. Overall a job that was not hard and I did it. Black makes driving easier and less back light to distract vision overall.
Here is the liner just before I slipped it back into the C. Overall a job that was not hard and I did it. Black makes driving easier and less back light to distract vision overall.
2 2016/09/15 13:13:53
This it the grinding wheel truing tool that I embossed the liner to the roof with. this made short work of getting it to attach.
This it the grinding wheel truing tool that I embossed the liner to the roof with. this made short work of getting it to attach.
0 2016/09/15 13:12:59
I found that the roof had a tinny sound and I added some sound liner to the roof for a nicer ride.
I found that the roof had a tinny sound and I added some sound liner to the roof for a nicer ride.
0 2016/09/15 13:12:01
wheel with the HELPER stud, hangs safely and allows easier installation. I hand install studs, run them on with the gun at setting "1" and then torque them setting on the ground
wheel with the HELPER stud, hangs safely and allows easier installation. I hand install studs, run them on with the gun at setting "1" and then torque them setting on the ground
0 2016/09/12 06:28:28
Hint to help hang wheels safely and align the wheel
Hint to help hang wheels safely and align the wheel
0 2016/09/12 06:26:39
Color coded studs for the mentally impaired
Color coded studs for the mentally impaired
0 2016/09/12 06:25:58
Marking wheel to remember proper spacer and studs
Marking wheel to remember proper spacer and studs
0 2016/09/12 06:25:11
How to keep studs together!
How to keep studs together!
0 2016/09/12 06:24:20
1963 I started helping put a buick V6 into my friends Fiat spyder, It was my suggestion after he killed motor. First car project with ford rear..........Lost youth
1963 I started helping put a buick V6 into my friends Fiat spyder, It was my suggestion after he killed motor. First car project with ford rear..........Lost youth
0 2016/08/30 09:30:44
This is the top of the headliner. I have painted fiber glas resin on the liner to add some strength to the brittle board
This is the top of the headliner. I have painted fiber glas resin on the liner to add some strength to the brittle board
0 2016/08/30 09:30:27
Cleaned and used lacquer thinner to wash up gummy stuff
Cleaned and used lacquer thinner to wash up gummy stuff
0 2016/08/30 09:30:17
Most of foam off 10 minutes since I started.
Most of foam off 10 minutes since I started.
0 2016/08/30 09:30:06
Used wire brush for cleaning files to scrape gummy foam off the top.
Used wire brush for cleaning files to scrape gummy foam off the top.
0 2016/08/30 09:29:53
Pulled of the cloth and leave the foam
Pulled of the cloth and leave the foam
0 2016/08/30 09:29:33
The top pulled out passenger door = starting it
The top pulled out passenger door = starting it
0 2016/08/30 09:29:14
20130730 162332
20130730 162332
0 2013/07/30 14:25:54
Rear case for shipping
Rear case for shipping
0 2013/07/30 14:24:07
How i did it
How i did it
0 2013/07/30 14:24:07
interior cover to hold rear
interior cover to hold rear
0 2013/07/30 14:21:48
Boxing it up
Boxing it up
0 2013/07/30 14:21:48
How to pull out the axles
How to pull out the axles
0 2013/07/17 13:43:15
Failed rear gear
Failed rear gear
0 2013/07/17 13:43:15
Broken off pinon tooth
Broken off pinon tooth
0 2013/07/17 13:43:15
Chewed up ring gear
Chewed up ring gear
0 2013/07/17 13:43:15
Opened up rear gear.
Opened up rear gear.
0 2013/07/17 13:43:15
Wallered out ring gear #2.
Wallered out ring gear #2.
0 2013/07/17 13:43:15
new photos 91409 017
new photos 91409 017
0 2012/09/27 00:24:40
new photos 91409 016
new photos 91409 016
0 2012/09/27 00:24:40