Crossfire Roadster A place to post Roadster specific topics.

TPMS Help please on Convertible

Thread Tools
 
  #1 (permalink)  
Old 07-14-2014, 07:46 PM
Bullish's Avatar
Thread Starter
Join Date: Sep 2013
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default TPMS Help please on Convertible

I read many post about disabling the TPMS. Can someone tell me if the #2 wire is located under the dome light or under the garage door link buttons? If it is under the dome light how do you remove it? I removed the lens cover but not sure how to remove housing? Thank you so much for any help.
 
  #2 (permalink)  
Old 07-15-2014, 06:47 AM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 79
Posts: 12,783
Received 153 Likes on 141 Posts
Default Re: TPMS Help please on Convertible

There are 2 Phillips screws holding the dome light to the body.
 
  #3 (permalink)  
Old 07-15-2014, 03:37 PM
Bullish's Avatar
Thread Starter
Join Date: Sep 2013
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TPMS Help please on Convertible

Originally Posted by ala_xfire
There are 2 Phillips screws holding the dome light to the body.
Thanks for the information. I don't know how I didn't see them. I'll look when I get home this evening. Do you know if the wire harness for the TMPS is under the dome, or is it under the home link?
 
  #4 (permalink)  
Old 07-15-2014, 03:50 PM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 79
Posts: 12,783
Received 153 Likes on 141 Posts
Default Re: TPMS Help please on Convertible

I 'think' its Under The Dome.
( Ask Big Jim when you see him there, he's a real nice guy )
 
  #5 (permalink)  
Old 07-15-2014, 03:53 PM
Bullish's Avatar
Thread Starter
Join Date: Sep 2013
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TPMS Help please on Convertible

Originally Posted by ala_xfire
I 'think' its Under The Dome.
( Ask Big Jim when you see him there, he's a real nice guy )

Thanks I greatly appreciate your help
 
  #6 (permalink)  
Old 07-17-2014, 01:53 PM
Join Date: May 2014
Location: Denver
Age: 46
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TPMS Help please on Convertible

Just did this a couple weeks ago. The plug is tucked away towards the windshield. I had to tear the foam wrap away to get mine apart but alas it came apart. You then remove the lock at base of plug, pull the #2 wire and stick it in #6 slot. Boom no more light b/c the system is now turned off.
 
  #7 (permalink)  
Old 07-17-2014, 05:43 PM
Bullish's Avatar
Thread Starter
Join Date: Sep 2013
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TPMS Help please on Convertible

Originally Posted by Moltenburn
Just did this a couple weeks ago. The plug is tucked away towards the windshield. I had to tear the foam wrap away to get mine apart but alas it came apart. You then remove the lock at base of plug, pull the #2 wire and stick it in #6 slot. Boom no more light b/c the system is now turned off.
I feel like such a nitwit... I found the plug see the colored wire I need but can't pull the plug apart. Two questions, 1 can I just snip the wire, 2 to pull the plug apart is there a clip or something I have to press to release?

Thank you so much for your help.
 
  #8 (permalink)  
Old 07-17-2014, 07:30 PM
RED DOG's Avatar
Senior Member
Join Date: Jun 2012
Location: Key Largo FL . . . The fabulous Florida Keys
Age: 75
Posts: 2,876
Received 28 Likes on 25 Posts
Default Re: TPMS Help please on Convertible

Originally Posted by Bullish
I feel like such a nitwit... I found the plug see the colored wire I need but can't pull the plug apart. Two questions, 1 can I just snip the wire, 2 to pull the plug apart is there a clip or something I have to press to release?

Thank you so much for your help.
You can't disconnect the two connectors that are wrapped in foam OR you can't get the target wire out of the connector? When you are holding the target connector in your hand (the one having the gray wire with the yellow stripe in the #2 position) you'll see a "flap" on the connector. Pry open the flap and it will expose the individual wires and their tips. Press on the little "barb" that's on the tip to release the wire and then pull the wire out from the #2 position of the connector. Make sure the "barb" is sticking back up (you may need to pry it back up) and then re-insert the wire into the #6 position on the connector and it will "click in" with the "barb" again holding it in place. Put the two connectors back together the way you found them and button everything back up.
 

Last edited by RED DOG; 07-17-2014 at 07:40 PM.
  #9 (permalink)  
Old 07-17-2014, 09:37 PM
Bullish's Avatar
Thread Starter
Join Date: Sep 2013
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Re: TPMS Help please on Convertible

Mission completed Thank you so much. I don't know why but getting the plug apart was a PITA, not seeing that stupid light priceless..... Thank you again you Rock!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Osusannah
Crossfire Roadster
38
02-12-2024 01:49 PM
syfi
TSBs and How-To Articles
41
12-11-2023 07:31 PM
Darryl Camisa
New Member Introductions
12
10-07-2015 07:10 AM
caseydeankopp
WTB - Items/Parts Wanted to Buy - Archive
12
09-13-2015 07:25 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: TPMS Help please on Convertible



All times are GMT -4. The time now is 08:39 AM.