FOB with panic button programming
Thread Starter
Joined: Sep 2013
Posts: 51
Likes: 1
From: Fairborn, OH
FOB with panic button programming
I just purchased a new key with 3 button key fob from local Chrysler dealer $165. I programmed using the following method.
1.Press either the lock or unlock button momentarily twice.
2.Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
The above worked..
EXCEPT the panic button seems to do nothing. Does the above programming method not work for 3 button remote? Any suggestions as how to get the panic button
to function?
9/22/2013 Problem resolved please disregard.
1.Press either the lock or unlock button momentarily twice.
2.Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
The above worked..
EXCEPT the panic button seems to do nothing. Does the above programming method not work for 3 button remote? Any suggestions as how to get the panic button
to function?9/22/2013 Problem resolved please disregard.
Last edited by gualtira; Sep 22, 2013 at 06:33 AM. Reason: Problem resolved
Thread
Thread Starter
Forum
Replies
Last Post
o55ie18
Troubleshooting & Technical Questions & Modifications
9
Oct 5, 2015 05:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)