All Crossfires A place to discuss any model of the Crossfire.

Hood Release Cable

Thread Tools
 
Old Oct 24, 2013 | 06:39 PM
  #1 (permalink)  
Jacksung's Avatar
Thread Starter
Joined: Nov 2010
Posts: 17
Likes: 1
Default Hood Release Cable

2005 CF limited with broken hood release cable. How do I get the hood open. Thanks for any help
 
Reply
Old Oct 24, 2013 | 06:44 PM
  #2 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Hood Release Cable

Originally Posted by Jacksung
2005 CF limited with broken hood release cable. How do I get the hood open. Thanks for any help
With a lot of patience and care you can unbolt the hood latch through the grille I think.
There is a thread somewhere here.
Try this CLICK, you must use a ratchet wrench if you can get one, 10mm size, or it may take forever. The wrench goes through the top slot of course and you will need patience to get it on the head of the bolt the plastic shield will help you locate the head.

 
Attached Images
File Type: jpg
DSC_0474 (800x662).jpg (330.8 KB, 598 views)

Last edited by onehundred80; Oct 24, 2013 at 07:30 PM.
Reply
Old Oct 24, 2013 | 07:03 PM
  #3 (permalink)  
Jacksung's Avatar
Thread Starter
Joined: Nov 2010
Posts: 17
Likes: 1
Default Re: Hood Release Cable

Thanks for the info. I have done search but with no luck at finding the thread
 
Reply
Old Oct 24, 2013 | 07:30 PM
  #4 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Hood Release Cable

Originally Posted by Jacksung
Thanks for the info. I have done search but with no luck at finding the thread
I have updated the thread.
 
Reply
Old Oct 24, 2013 | 10:17 PM
  #5 (permalink)  
Jacksung's Avatar
Thread Starter
Joined: Nov 2010
Posts: 17
Likes: 1
Default Re: Hood Release Cable

Thanks so much. I will work on it in the am
 
Reply
Old Oct 25, 2013 | 07:09 AM
  #6 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Hood Release Cable

Perfect time for that aftermarket SS grille on RED DOG's thread !
Just grab your plastic one and jerk it out, then you can get at the release lever on the back of the latch.
 
Reply
Old Oct 25, 2013 | 07:23 AM
  #7 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Hood Release Cable

Since I've seen OEM's for sale at the $200 mark.. Think I'd take a little time with a wrench myself..
 
Reply
Old Oct 25, 2013 | 07:38 AM
  #8 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Hood Release Cable

I WAS joking .....
 
Reply
Old Oct 25, 2013 | 09:16 AM
  #9 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Hood Release Cable

Originally Posted by ala_xfire
I WAS joking .....
Some people dislike the OEM so much.. ya never know..
 
Reply
Old Oct 25, 2013 | 03:47 PM
  #10 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 647
From: Ontario
Default Re: Hood Release Cable

Originally Posted by Mrmiata
Some people dislike the OEM so much.. ya never know..
I for one have not seen a grille I like better than the OEM one.
These new mesh grilles look like they are made from the deep fryer French Fry baskets.
You cannot say you do not like them in the Group Buy thread so I'll say it here.
 
Reply
Old Oct 25, 2013 | 03:57 PM
  #11 (permalink)  
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 26
From: Kellyville, Ok
Default Re: Hood Release Cable

Originally Posted by onehundred80
I for one have not seen a grille I like better than the OEM one.
These new mesh grilles look like they are made from the deep fryer French Fry baskets.
You cannot say you do not like them in the Group Buy thread so I'll say it here.

OMG! We finally totally agree! LOL. The only thing I've seen close to worth buying to replace mine is the billet style.. and that's since I went to the billet wheels and lower grills.. and even then there is the one that sits back .. which is a no go.. and I have yet to see the one that protrudes to a "flush" fit on ebay.
 
Reply
Old Oct 29, 2013 | 06:57 PM
  #12 (permalink)  
Jacksung's Avatar
Thread Starter
Joined: Nov 2010
Posts: 17
Likes: 1
Default Re: Hood Release Cable


Thank you onehundred80

Following your advice I finally got my hood up and am makingrepairs.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Charlesl
All Crossfires
12
Sep 30, 2015 10:46 PM
rmcdaniel12
Crossfire SRT6
12
Sep 22, 2015 01:20 PM
skeet370
Troubleshooting & Technical Questions & Modifications
29
Sep 18, 2015 05:53 AM
waldig
All Crossfires
8
Sep 17, 2015 10:35 AM
Vegaslegal
All Crossfires
0
Sep 10, 2015 11:24 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 01:31 AM.