All Crossfires A place to discuss any model of the Crossfire.

Removing gas door

Thread Tools
 
Old Aug 1, 2014 | 12:23 PM
  #1 (permalink)  
deerhunter's Avatar
Thread Starter
Joined: Dec 2013
Posts: 82
Likes: 7
From: Powder Springs,GA
Default Removing gas door

Hello Everyone,
I have to remove my gas door for the paint guy to get it matched
for some paint work, does anyone kinow how to remove that?
He mentioned something about sticking a screw driver into a hole to release
a latch? I would like to remove it myself.
Any help would be appreciated.
Thanks
 
Reply
Old Aug 1, 2014 | 02:13 PM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Removing gas door

Here ya go :
 
Attached Images
File Type: jpg
Capture.JPG (53.9 KB, 125 views)
Reply
Old Aug 1, 2014 | 03:02 PM
  #3 (permalink)  
Indelibility's Avatar
Forum Regular
Joined: Jun 2009
Posts: 669
Likes: 3
From: Cornelius, NC
Default Re: Removing gas door

Originally Posted by ala_xfire
Here ya go :
That looks complicated.
 
Reply
Old Aug 1, 2014 | 03:14 PM
  #4 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Removing gas door

Originally Posted by indelibility
that looks complicated.
lol ...............
 
Reply
Old Aug 2, 2014 | 09:17 AM
  #5 (permalink)  
deerhunter's Avatar
Thread Starter
Joined: Dec 2013
Posts: 82
Likes: 7
From: Powder Springs,GA
Default Re: Removing gas door

Where are the bolts, when I open the gas door I don't see
the bolts, could someone Please explain where the bolts are.
I am afraid to pull on anything for fear I may break something.
Thanks
 
Reply
Old Aug 2, 2014 | 09:37 AM
  #6 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Removing gas door

Originally Posted by deerhunter
Where are the bolts, when I open the gas door I don't see
the bolts, could someone Please explain where the bolts are.
I am afraid to pull on anything for fear I may break something.
Thanks
I must apologize for just posting the data from the service manual without checking it out.
You are correct, there is no visible way to remove the fuel door on mine either.

Anyone ever done this ????????

Or alternatively, can anyone think of some other body painted piece that can be easily removed for paint matching ?
 

Last edited by ala_xfire; Aug 2, 2014 at 09:44 AM.
Reply
Old Aug 2, 2014 | 09:46 AM
  #7 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Removing gas door

Originally Posted by deerhunter
Where are the bolts, when I open the gas door I don't see
the bolts, could someone Please explain where the bolts are.
I am afraid to pull on anything for fear I may break something.
Thanks
There are no bolts, the whole unit is held in with tabs from the inside.
See this post, and halfway down it is a picture of the whole thing out and an explanation of how to release it from the inside.
 
Reply
Old Aug 2, 2014 | 09:52 AM
  #8 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Removing gas door

Thank you Dave, I somehow knew you'd have that info at your fingertips. ( stupid repair manual ! )
Good luck deerhunter !!
 
Reply
Old Aug 2, 2014 | 11:45 AM
  #9 (permalink)  
deerhunter's Avatar
Thread Starter
Joined: Dec 2013
Posts: 82
Likes: 7
From: Powder Springs,GA
Default Re: Removing gas door

OK
So I was thinking I would have to remove an external mirror for color matching
When the paint guy showed up
Open gas door, on the outer edge there is a small opening, use a skinny flat head
screw driver, insert into hole and depress a small plastic tab, then the gas door cover
slides right off. He had it off in less than a minute.

Oh ya, and to remove the door handles you must use a Screw Driver type 4mm hex
I was using a standard type L shape hex, didn't work so well. I learned that from
a Dealer Tech., who had both handles off in less than 5 minutes. I tried to tip the
fella but he wouldn't take my cash, he just told be to come back when I am ready
to put them back on. He restored my Faith in dealer,s but just a little bit though.

Thanks for all the help guys.....See ya at the Dragon
 
Reply
Old Aug 2, 2014 | 05:53 PM
  #10 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Removing gas door

Originally Posted by deerhunter
OK
So I was thinking I would have to remove an external mirror for color matching
When the paint guy showed up
Open gas door, on the outer edge there is a small opening, use a skinny flat head
screw driver, insert into hole and depress a small plastic tab, then the gas door cover
slides right off. He had it off in less than a minute.
Great news, as my sig says; "No day in which you learn something is a complete loss".
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JCassiW
Southeast Forum
20
Mar 3, 2019 09:43 AM
SparkieSRT6
TSBs and How-To Articles
7
Jan 11, 2016 10:49 PM
rocketrage
Troubleshooting & Technical Questions & Modifications
6
Oct 7, 2015 05:00 PM
xfireon20z
Parts/Accessories for sale - Archive
3
Jul 20, 2015 04:35 PM
55chevy
New Member Introductions
1
Jul 20, 2015 03:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 05:08 PM.